Publications

  • Pramod Kumar, Umang Kant,  Secure Trust Aware Hybrid Key management Routing Protocols for WSNs for the Application of IoT, International journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278-3075, Vol.8, Issue-9S4, July 2019.

  • Mr. Aditya Tandon, An Empirical Analysis of using Blockchain Technology with Internet of Things and its Application, International Journal of Innovative Technology and Exploring Engineering (IJITEE), Vol.8, Issue.9S3, Page No.1469-1475.

  • Mr. Aditya Tandon , Challenges of Integrating Blockchain with IoT     International Journal of Innovative Technology and Exploring Engineering (IJITEE), Vol.8, Issue:9S3, pp.1476-1472(Scopus Indexed)

  • Mr. Aditya Tandon, Melange of IoT and Randsomware     International Journal of Innovative Technology and Exploring Engineering (IJITEE), Vol.8,I ssue:9S3,pp.1460-1468    (Scopus Indexed)

  • Mr. Aditya Tandon,Energy Efficient Cross Layer Routing Protocols for IoT Applications-An Emprical Research     International Journal of Engineering and Advanced Technology, Vol.8, Issue:6S    ,Jul 2019, Scopus Indexed.

  • SonamSoni,Automatic fill in the blanks type question and answer geenration from the Text using NLP (Accepted),Journal of Advance Research in Dynamical control System.

  • Deepa Arora, An order level inventory model for deteriorating stock product and time dependent demand under shortages, International Journal Mathematics in operational Research, Inderscience Publication, Vol.    1, no.23, pp.331-341, 2018

  • Deepa Arora, An EPQ model for deteriorating items with variable demand rate and allowable shortages, International Journal Mathematics in operational Research, vol.12, no.1, pp.117-127

  • Sonakshi Vij, Scientometric inspection of research progression in hesitant fuzzy sets , Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-8, 2019.(SCI Indexed)

  • Shika Saxena, Implementation and simulation of Failsafe Network Architecture,     International  Research Journal of Engineering and Technology(IRJET), Vol.6, no.5, May 2019.

  • ArvindDagur, Energy Harvesting Earliest Deadline First Scheduling Algorithm For Increasing Lifetime of Real Time Systems, International Journal of Computer and Electrical Engineering, (IAES SCOPUS Indexed)Vol.9, no.1, pp.539~545.

  • Arvinddagur, Task Scheduling in Real Time Systems with Energy Harvesting and Energy Minimization,  Journal of Computer Science. (Science Publication, SCOPUS Indexed), Vol.14, No.8, PP. 1126-1133.

  • SandhyaAvasthi, Electronic health Record and its Dynamic Implementation using Graphical representation Methods,  3rd International conference on Challenges & Opportunities in Digital era: management & IT Practices, 30th August 2019. ISBN No. 978-81-937914-0-0.

  • Aditya Tandon, Trust Based Enhanced Secure Routing against Rank and Sybil Attacks in IoT, 12th International Conference on Contemporary Computing (IC3) , IEEE Conference,8th -10th Aug 2019, INSPEC Accession Number: 18994919.

  • Anuj Singh, ShashiBhushan , A Brief Analysis and Comparison of  DCT and DWT Based Image Compression Techniques, International Conference On Information Management & Machine Intelligence (ICIMMI-2019), December 14-15, 2019. (Paper Accepted).

  • SandhyaAvasthi , Topic modeling on Twitter data and identifying health related issues, International Conference On Information Management & Machine Intelligence (ICIMMI-2019), December 14-15, 2019. (Paper Accepted).

  • Ruchi Jain, Sahil Aggarwal, Smart  Trash Barrel : An IoT Based System For Smart Cities, International Conference On Information Management & Machine Intelligence (ICIMMI-2019), December 14-15, 2019. (Paper Accepted).

  • Shikha Saxena, Achieving Security in Fail Safe network Architecture, International Conference on Information Management & Machine Intelligence (ICIMMI-2019), December 14-15, 2019. (Paper Accepted).

  • Shikha Saxena, Comparative study of WSNs protocols, IEEE International Conference ICACCA, November 2019. (Paper Accepted)

  • Pramod Kumar, Dynamic task migration mechanism in cloud Environment : Literature Review and future Tends published in August 2018 in  International Journal of Service Science, Management, Engineering, and Technology (IJSSMET)

  • Arvind Kumar, Bashir Alam,” Task Scheduling in Real Time Systems with Energy Harvesting and Energy Minimization” Journal of Computer Science. (Science Publication, SCOPUS Indexed, DOI: 10.3844/jcssp.2018, H-index: 21), Volume 14, Issue 8, pp 1126-1133, 2018.

  • Arvind Kumar, Bashir Alam, “Energy Harvesting Earliest Deadline First Scheduling Algorithm For Increasing Lifetime of Real Time Systems,” International Journal of Computer and Electrical Engineering, (IAES SCOPUS Indexed, DOI: DOI: 10.11591/ijece.v9i1.pp539-545, Vol. 9, No. 1, February 2019, pp.539~545 H-index: 11), 2018.   

  • Umang Kant, “Security Measures in Cloud Networked Robotics: A Study”, International Journal of Computer Science and Soft Computing Vol 01, Issue 01, May 2018, Pg. 30-39, Mantech Publications.

  • Vij, S., Jain, A., Tayal, D., & Castillo, O. (2018). An Analytical Insight to Investigate the Research Patterns in the Realm of Type-2 Fuzzy Logic. Journal of Automation, Mobile Robotics & Intelligent Systems, 12(2). SCOPUS Indexed.

  • Deepa Khurana, Shilpy Tayal, S.R Singh, An EPQ model for deteriorating items with variable demand rate and allowable shortages. International Journal of Mathematics in Operational Research, Vol. 12, No. 1, 2018.

  • Sharmila, Hybrid Key Management Scheme for Heterogeneous Wireless Sensor Networks”, International Journal of Knowledge Engineering and Soft Data Paradigms (Inderscience). (Accepted and Under Publication).

  • A.Gupta,S.Taneja, G.Malik, S. Vij, D. Tayal, A.Jain, SLANGZY: A fuzzy logic-based algorithm for English slang meaning selection, Progress in artificial intelligence, Springer, SCOPUS Indexed.

  • Deepa khurana, Rekha Rani Chaudhary, An order level inventory model for deteriorating stock product and time dependent demand under shortages. International journal of Mathematics in Operational Research, Vol. 12, No. 3, 2018.

  • Prateek Agrawal,Dimple Sethi, “Moving Object Detection and Recognition Using Optical Flow and Eigen Face Using Low Resolution Video” ,Recent Patents on Computer Science, 2018.

  • Mohit Singhal, Nikhil Kumar, Rashmi, Saket Singhal, Umang Kant, “Sentiment Analysis: Positive, Negative or Neutral”, International Journal of Software and Computer Science Engineering, Vol 02, Issue 01, April 2017, Pg. 23-32, Mantech Publications.

  • S.Vij, A.Jain, D.Tayal, O.Castillo, Fuzzy logic for inculcating significance of semantic relations in word sense disambiguation using a WordNet graph, 2017, INTERNATIONAL JOURNAL OF FUZZY SYSTEMS, SCI-E Indexed, Impact Factor 2.198. https://doi.org/10.1007/s40815-017-0433-8.

  • A.Jain, D.K.Tayal, M.Khari, S.Vij, A Novel Method for Test Path Prioritization using Centrality Measures, In International Journal of Open Source Software and Processes,Volume-7,Issue-4,2017. SCOPUS Indexed.

  • Jain, A., Tayal, D. K., &Vij, S. (2017). A Semi-Supervised Graph-based Algorithm for Word Sense Disambiguation. Global Journal of Enterprise Information System, 8(2), 13-19.

  • Jain, A., Singh, A., Tayal, D. K., &Vij, S. (2017). Amalgamating Data Analytics and Machine Learning for Predicting Sex Ratio and Infant Mortality Rate to Improve Gender Composition. Global Journal of Enterprise Information System, 8(3), 1-5.

  • D.K.Tayal, S.Vij, G. Malik, A.Singh, An OCR based automated method for textual analysis of questionnaires, IJCSE, pp.184-191, 2017.

  • Meenu Shukla, Sanjiv Sharma “A Comparative Study of Existing Data Mining Techniques For Phishing Detection”, International Journal of Computer Sciences and Engineering (IJCSE), Volume-5, Issue-5, pp. 182-187, E-ISSN: 2347-2693, May 2017.

     

  • Meenu Shukla, Sanjiv Sharma “Analysis of Efficient Classification Algorithm for Detection of Phishing Site”, International Journal of Scientific Research in Computer Sciences and Engineering (IJSRCSE), Volume-5, Issue-3, pp. 136-141, E-ISSN: 2320-7639, June 2017.

  • Ashish Kumar, “Design and Implementation of Hindi Language interface to DB”, International Journal of Current Engineering and Scientific Research, Volume-4, Issue-10, Oct 2017, ISSN (PRINT): 2393-8374, (ONLINE): 2394-0697, PP. no. 89-94. (UGC Approved Journal)

  • S. R. Singh, DeepaKhurana and ShilpyTayal, An economic order quantity model for deteriorating products having stock dependent demand with trade credit period and preservation technology. Uncertain Supply Chain Management 4 (2016) 29–42

  • Deepa Khurana and Rekha Rani Chaudhary, Optimal pricing and ordering policy for deteriorating items with price and stock dependent demand and partial backlogging. Uncertain Supply Chain Management, 4(4), 2016.

  • Bhavesh Kumar Shukla, Gautam Kumar, Ashish Kumar, “An approach for Skew Detection using Hough Transform”, International Journal of Computer Applications, Volume 136 – No.9, February 2016 20 ISSN No.: 0975 – 8887 Pages: 20-23.  

  • Dimple Sethi,et.al “X-Gyno: Fuzzy Method based Medical Expert System for Gynaecology ”,Indian Journal of Science and Technology, Vol 9,28, July,2016.

  • Dimple Sethi, “X-Tumour: Fuzzy Rule based Medical Expert System to detect tumours for Gynaecology ”,Indian Journal of Control Theory and Applications Vol 9,11, July,2016.

  • Prateek Agrawal,Vishu Madaan,Dimple Sethi, “X-Hubsis: A Fuzzy Rule based Human Behaviour Identification System based on Body Gestures”,Indian Journal of  Science and Technology,Vol 9, November,2016.

  • Sandhya Avasthi, Tanushree Sanwal“ E-Commerce and its sway on the minds of young generation“ is published in   International Journal of Scientific and Research Publications, Volume 6, Issue 3, March 2016 112 ISSN 2250-3153.

  • Sandhya Avasthi, Tanushree Sanwal“ Biometric Authentication Techniques: A Study on Keystroke Dynamics“ is published in IJSEAS, Volume-2, Issue-1, January 2016 ISSN: 2395-3470.

  • Divya Arora, Umang Kant, “A Novel Approach for Age Classification from Face using AAM & SVM”, International Journal of Computer Science & Mobile Computing, Vol 05, Issue 02, February 2016, Pg. 260-267.

  • Diwaker, Manoj Kumar Chaudhary, Praveen Tripathi, DrAshutosh Bhatt, DrAbhaySaxena, "A Comparative Performance Analysis of Feature Extraction Techniques for Hyperspectral Image Classification" in International Journal of Software Engineering and it’s Applications Vol. 10, No. 12 (2016), pp. 179-188. 

  • Nitish Kumar Saini, Diwaker, “An Integrated Approach to Content based Image   Retrieval” in  International Journal of Engineering Research & Technology, Volume 5, Issue 05, May-2016

  • Sharmila, “An energy efficient routing protocol using hybrid evolutionary algorithm in wireless sensor networks”, International Journal of Knowledge Engineering and Soft Data Paradigms, Inderscience publication (ACM Digital Library), vol.5, No.3/4, pp.285-301, 2016.

  • Sharmila, “Remote user authentication scheme for hierarchical WSNs”, International Journal of Computer Science and Information Security (IJCSIS), USA, vol.14, no. 12, pp. 276-285, December 2016. (Scopus Indexed).

  • Anuj Kumar Singh- “ Fuzzy Logic: Fuzzy Rules and Decisions involving in Fuzzy fication and Defuzzy fication processes” IJCTE 2016 Vol.8(2): 94-101 ISSN: 1793-8201

     

  • SandhyaAvasthi, AshtaGupta,”Image based low cost method to the OMR process for surveys and research in International Journal of Scientific Engineering and Applied Science (IJSEAS) – Volume-2, Issue-7,July 2016 ISSN: 2395-3470.

  • Kumar, Arvind, and Bashir Alam. "Energy efficient approach for transient fault recovery in real time systems." International Journal of Engineering, Science and Technology 7, no. 3, pp. 118-122, 2015.

  • Sharma P., Sharma N., “Hand & Upper Body Based Hybrid Gesture Recognition”, IJCSIT, ISSUE 3, Vol 6,MAY’2015

  • Deepa Khurana, S. R. Singh  andShilpyTayal A Supply Chain Production Inventory Model for Deteriorating Product with Stock Dependent Demand under Inflationary Environment and Partial Backlogging. International Journal of Computer Applications (0975 – 8887) Volume 131 – No.1, December2015.

  • Deepa Khurana, Two Warehouse Inventory Model for Deteriorating Items with Time Dependent Demand under Inflation. International Journal of Computer Applications (0975 – 8887) Volume 114 – No. 7, March 2015.

  • Sharmila, “Hybrid key management scheme for wireless sensor networks”, SERSC-International Journal of Security and its Application, Australia, vol.9, no.11, pp.125 -132, November 2015, ISSN: 2319 7064. (Scopus indexed)

  • Yashpal, Rajesh Bhagat, Diwaker, “Deficiency and Secure the Attack Superficies to Your Organization Localization Main DNS SERVER”, in INTERNATIONAL JOURNAL OF     ENGINEERING SCIENCES & RESEARCH TECHNOLOGY, Volume- 86, issue- 4, Page no- 640- 644, ISSN No-2277-9655, Nov 2014, impact factor 3.449.

  • Sharmila,  “A Novel Secure Key Management Scheme for Wireless Sensor Networks using post Deployment Knowledge”, International Journal of Science and Research,Vol.3,Issue 9, pp.346  349, September 2014, ISSN :2319 7064.

  • Sharmila,  “A novel secure key management scheme for wireless sensor networks using post deployment knowledge”, International Journal of Science and Research, vol.3, no. 9, pp.346-349, September 2014, ISSN :2319 7064.

  • Arvind Kumar, Bashir Alam, “Fault Tolerance Approach with Energy Harvesting in Real Time System” International Journal of Information and Computation Technology. ISSN 0974-2239 Volume 3, Number 10, pp. 993-1000, 2013.

  • ShashiBhushan,Implementation and Evaluation of Wireless Mesh Networks on MANET Routing Protocol”s: International Journal of Advanced Research in Computer and Communication, Volume 2 Issue 6, June 2013.

  • Sharmila, “An Intelligent New Age Method of Image Compression and Enhancement with Denoising for Bio-Medical Application” in ISROSET IJSRCSE, Vol.1, Issue 4, August 2013, ISSN 2320 7639.

  • Sharmila,  “A New Age Architecture and streamlined energy sensor routing scheme using Indigenously Developed Green energy relative direction based sensor routing scheme in CiiT international Journal, Vol.5, no.7, July 2013.

  • Sharmila,  “Fingerprint Matching Using Ridge Features and Hamming Algorithm for Distorted Fingerprints in CiiT international Journal, Vol.5, no.7, July 2013.

  • Sharmila,  “A Survey of Key Management Schemes in Wireless Sensor Networks” in IJCOT, Vol.3, Issue 9, Oct 2013.

  • SandhyaAvasthi, AvinashDwivedi“ Prediction of Mobile User Behavior Using Clustering”  published in  International   Journal of Scientific and Research Publications, Volume 3, Issue 2, February 2013 1 ISSN 2250-3153.

  • Ashish Kumar, K. S. Vaisla, “Hindi Language Interface to Databases”, Oriental Journal of Computer Science and Technology, Volume-6, Issue 2, June 2013, ISSN: 0974-6471, Pages: 133-140.

  • Ashish Kumar, AnkitAswal, Lalit Singh, “4G Wireless Technology: A Brief Review”, International Journal of Engineering and Management Research, Volume-3, Issue-2, April 2013 ISSN No.: 2250-0758 Pages: 35-43.

  • Ashish Kumar, DeepeshRawat, AnkitAswal, “An Overview on Different Techniques used in Intrusion Detection”, Elixir International online journal, 58(2013), May 2013, ISSN: 2229 -712X Pages: 15043-15047.
        

     

  • Ashish Kumar, K. S. Vaisla, “Natural Language Interface to Databases: Development Techniques”, Elixir International online journal, Volume- 58(2013), May 2013, ISSN: 2229 -712X Pages: 14724-14727.

  • Arvind Kumar, Pawan Singh Mehra, Gagan Gupta and AatifJamshed “Modified Block Playfair Cipher using Random Shift Key Generation” International Journal of Computer Applications, Volume 58 number 5 pp10-13, November 2012, New York, USA

  • Arvind Kumar, AnkurTripathi, Abhishek “Information and Communication Technology for Rural Developement” International Journal of Computer Science and Engineering (IJCSE), Volume 4, No-5, May 2012, pp 824-828.

  • ShikhaSaxena,“Analytical Study Of different Types of network Failure detection and possible remedies” published in International Journal of advance research and
    computing Volume 1, Issue 2, and July 2012.

     

  • Arvind Kumar, Rama Shankar Yadav, Ranvijay, Anjali Jain “Fault Tolerance in Real Time Distributed System” International Journal of Computer Science and Engineering (IJCSE), Volume 3 No.2, Feb 2011, pp 933-939.

  • Arvind Kumar, Bashir Alam,”Fault Tolerance Using Multiple Execution in Real Time Distributed Cloud”, Indonesian Journal of Computer and Electrical Engineering, (Communicated, SCOPUS Indexed)

  • Arvind Kumar, Bashir Alam,”Fault Tolerant Algorithm for IoT based Energy Harvesting Systems”, Journal of King Saud University - Computer and Information Sciences, (Communicated, SCOPUS Indexed).

  • Malik, G., Rathore, A., Vij, S., Utilizing Various Machine Learning Techniques to Classify Data in the Business Domain. International Journal, 4, 118-122.
    Sharmila, “Qualitative Analysis of Hardware Description Languages: VHDL and Verilog” in IJCSIS, Vol.9, No.4, April 2011.

  • Sharmila, “A New Approach to Image Contrast Enhancement using Weighted Threshold Histogram Equalization with Improved Switching Median Filter” in IJAEST, Vol.7, Issue no.2, June 2011.

  • Pramod Kumar, A Survey : Review of Cloud IoT security technique, Issues and challenges published in 2nd International Conference on Advanced Computing & Software Engineering (ELSVIER) at KNIT Sultanpur during 09-09 Feb,2019.

  • Pramod Kumar, Internet of things enabled intuitive & interaction data analysis Published in International Conference on Computation Intelligence & Internet of things(ELSVIER) during 14-15 December 2018 at NIT Agartala.

  • Pramod Kumar: Increase the growth of Production using Internet of thing accepted in 3rd IEEE 2018  International Conference on Internet of Thing: Innovation and usage  during 21 -22 Feb 2018 at  Birla Institute of Applied Sciences ,Nainital ,Uttrakhand

  • Pramod Kumar: Advancement in Quality of Services in Wireless Sensor Network accepted in 3rd IEEE 2018 International Conference on Internet of Thing: Innovation and usage during 21 -22 Feb 2018 at   Birla Institute of Applied Sciences ,Nainital ,Uttrakhand.

  • Y. Sharma, Shatakshi, Palvika, A. Dagur and R. Chaturvedi, "Automated Bug Reporting System in Web Applications," 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI), IEEE, Tirunelveli, India, 2018, pp. 1484-1488.

  • Y. Sharma, Shatakshi, Palvika, A. Dagur and R. Chaturvedi, " Automated Bug Reporting System with Keyword-Driven Framework," 2018 Soft Computing and Signal Processing, https://doi.org/10.1007/978-981-13-3393-4_28, Springer Nature Singapore, SCOUPS Indexed.

  • R. Sharmila, VaishaliPuranik, Vijaylakshmi, “Key Management Scheme for Wireless Sensor Network Using HECC”, 4th International Conference on Cyber Security ( ICCS ) 2018,  Jaipur, Rajasthan,ISSN 2460 4010, October 26- 27,  Elsevier-SSRN- 2018.(Scopus Indexed)

  • G.Malik, S.Vij, D.Tayal, A.Jain, E-ALIVE: An Integrated Platform Based on Machine Learning Techniques to Aware and Educate Common People with the Current Statistics of Maternal and Child Health Care, ACM Women in Research, 2018.

  • S.Vij, D.Tayal, A.Jain, Text Summarization using WordNet Graph based Sentence Ranking, ICCCN 2018, 2nd International conference on communication, computing and networking (Springer), NITTTR Chandigarh, 29 - 30 March 2018.

  • Tackling Cyberstalking: Problem and Prevention, INDIACom – 2018, technically sponsored by IEEE Delhi Section, 14th - 16th March, 2018 at BharatiVidyapeeth, New Delhi (INDIA), SCOPUS Indexed.

  • S.Aggarwal, R.Dhankher, A.Jian, D.K.Tayal, S.Vij, K.Meena, Investigation of Web Information Retrieval Techniques, INDIACom – 2018, technically sponsored by IEEE Delhi Section, 14th - 16th March, 2018 at BharatiVidyapeeth, New Delhi (INDIA), SCOPUS Indexed.

  • Analysis of Various Data Mining Techniques for Blood Related Disease Anemia along with Fuzzy Logic and Machine Learning, INDIACom – 2018, technically sponsored by IEEE Delhi Section, 14th - 16th March, 2018 at BharatiVidyapeeth, New Delhi (INDIA), SCOPUS Indexed.

  • Monika, S.Vij, A.Jain, D.K.Tayal, K.Meena, A Study on the Recent Advancements in the Field of Topic Labeling, INDIACom – 2018, technically sponsored by IEEE Delhi Section, 14th - 16th March, 2018, BharatiVidyapeeth, New Delhi (INDIA), SCOPUS Indexed.

  • Anuj Kumar Singh “A Brief Survey on Energy Efficient Routing Parameters & Protocols in WSN “ in the 3rd IEEE International Conference OnInternet of Things: Smart Innovation and Usages ( IoT-SiU 2018 ) ISBN Number- 978-1-5090-3480-2

  • Anuj Kumar Singh “Advance Quality of Services in Wireless Sensor Network “ in the 3rd IEEE International Conference On Internet of Things: Smart Innovation and Usages ( IoT-SiU 2018 ) ISBN Number- 978-1-5090-3480-2

  • Akshay Sharma, V.N. Puranik, M L Kolhe, S.R. Nandanwar, “Minimizing Uncertainties with Improved Power System Stability Using Wide Area Fuzzy-2 Logic Based Damping Controller” 3rd International Conference on Computational Intelligence & Communication Technology (CICT)-2017, 9-10 Feb. 2017, IEEE, Ghaziabad India.

  • VishuTyagi, “Internet Of Things and Social Networks: A survey”, IEEE International Conference on Computing Communication and Automation (ICCCA 2017) at GalgotiasUniversity,GreaterNoida,Uttar Pradesh, MAY 5-6, 2017.

  • ShashiBhushan, "An overview of data redundancy reduction schemes in WSNs," 2017 3rd International Conference on Advances in Computing,Communication& Automation (ICACCA) 2017, ISBN :978-1-5090-0673-3.

  • Diwaker, and Ashutosh Bhatt, “Assessment of Classification Techniques for Hyperspectral Image Classification” , Proceeding of the National Conference on Recent Innovations in Emerging Technology & Science on 3-4 March 2017 organized by JB Institute of Technology, Dehradun.

  • Brajveer, Prashant and Diwaker, “Descrete Wavelet Based Image Identification Using         Neural Network” Proceeding of the National Conference on Recent Innovations in    Emerging Technology & Science on 3-4 March 2017 organized by JB Institute of Technology, Dehradun.

  • D.K. Tayal, A.Jain, S.Vij, G.Malik, S.Prasad, An automated method for content word selection to generate WordNet graphs, INDIACom - 2017; International Conference on Computing for Sustainable Global Development, technically sponsored by IEEE Delhi Section. SCOPUS Indexed

  • D.K.Tayal, S.Vij, M.Khari, D.Tayal,A.Jain, An analysis of security considerations in Opportunistic Networks , INDIACom - 2017, technically sponsored by IEEE Delhi Section. SCOPUS Indexed

  • D.K.Tayal, A.Jain, S.Vij, A.Singh, An analysis of various graph based clustering techniques ,INDIACom – 2017, technically sponsored by IEEE Delhi Section. SCOPUS Indexed

  • D.K.Tayal, S.Vij, D.Chaudhary, S.Gupta, A.Jain,  An Analysis of Graph-based Query Expansion Techniques , In INDIACom - 2017; technically sponsored by IEEE Delhi Section. SCOPUS Indexed

  • D.K.Tayal, S.Vij, A Survey on Optical Character Recognition , In INDIACom - 2017; International Conference on Computing for Sustainable Global Development, technically sponsored by IEEE Delhi Section. SCOPUS Indexed

  • D.K.Tayal, S.Vij, G.Malik, A.Singh, Applying Data Analytics to Agricultural Sector for Upcoming Smart Cities, INDIACom - 2017, technically sponsored by IEEE Delhi Section. SCOPUS Indexed.

  • G.Malik, D.Tayal, S.Vij, An Analysis of the Role of Artificial Intelligence in Education and Teaching, ICACNI 2017 (5th International Conference on Advanced Computing, Networking, and Informatics), NIT-Goa, To be published in  Advances in Intelligent Systems and Computing, Springer, SCOPUS Indexed.

  • Anuj Kumar Singh “Hierarchical routing protocols in wireless sensor networks:a brief survey” : in the 3rd IEEE International Conference on Advances in Computing, Communication and Automation (ICACCA-2017). ISBN Number- 978-1-5090-6785-5

  • Anuj Kumar Singh “Fault Tolerance in WSN “in International Conference on Recent trends in Computer Science  and Information Technology 2017 held at UIIT, Himachal Pradesh University , Shimla. ISBN Number- 978-1-4799-1734-1

  • Anuj Kumar Singh “A Survey on Smart Homes using Internet of Things “ in 2nd IEEE International Symposium on IoT-SIU 2017  held at Faculty of Engineering and Technology, MJP Rohilkhand University, Bareilly.

  • Kumar, A.; Alam, B., “Real Time Fault Tolerance Task Scheduling Algorithm with Minimum Energy Consumption," Springer AICS Series, SCOPUS Indexed, Volume 380,  pp 441-448, 2016.

  • Ashwini Kumar, VishuTyagi, “ Predicting Maintainability of Autonomic     Software Systems Using Fuzzy Logic”,IEEE International Conference on Computing Communication and Automation (ICCCA 2016) at GalgotiasUniversity,GreaterNoida,Uttar Pradesh, April 29-30 , 2016

  • ShashiBhushan, A new approach towards IoT by using health care-IoT and food distribution IoT:  Advances in Computing, Communication, & Automation (ICACCA) (Fall-2016). Published in IEEE Xplore Digital Library. ISBN :978-1-5090-3480-2

  • ShashiBhushan, Scantime antivirus evasion and malware deployment using silent-SFX: Advances in Computing, Communication, & Automation (ICACCA) (Fall-2016). Published in IEEE Xplore Digital Library( Spring-2016). Published in IEEE Xplore Digital Library. ISBN :978-1-5090-0673-1

  • Khari, M., Kumar, M., Vij, S., & Pandey, P. (2016, March). Smart Cities: A Secure Data Transmission Model, Second International Conference on Information and Communication Technology for Competitive Strategies (p. 10). ACM.

  • Vij, S., & Jain, A. (2016, March). 5G: Evolution of a secure mobile technology. In Computing for Sustainable Global Development (INDIACom), 2016, 3rd International Conference on (pp. 2192-2196). IEEE. SCOPUS Indexed.

  • Vij, S., & Jain, A. (2016, March). Smartphone nabbing: Analysis of intrusion detection and prevention systems. In Computing for Sustainable Global Development (INDIACom), 2016 3rd International Conference on (pp. 2209-2214). IEEE. SCOPUS Indexed

  • Khari, M., Kumar, M., Vij, S., & Pandey, P. (2016, March). Internet of Things: Proposed security aspects for digitizing the world, INDIACom 2016, pp. 2165-2170. IEEE. SCOPUS Indexed

  • Khari, M., Jain, A., Vij, S., & Kumar, M. (2016, March). Analysis of various information retrieval models. INDIACom 2016, pp. 2176-218. IEEE. SCOPUS Indexed

  • Vij, S., Tayal, D. K., & Jain, A. (2016, March). Word sense disambiguation using fuzzy semantic relations. INDIACom 2016, pp. 2197-2202. IEEE. SCOPUS Indexed

  • Meenu Shukla, “Location Based and Time Based Encryption Techniques” at International Conference on “MAKE IN INDIA: NEW TECHNOLOGIES, NEW PARADIGMS “organized by JagranLakecity University, Bhopal (M.P.) on 28th Jan 2016.

  • Sahil Aggarwal, Rishabh Joshi, Neharika Pandey, “Innovative and Optimized Computing”, International Journal of Engineering Applied Sciences and Technology, 2016 Vol. 1, Issue 3, ISSN No. 2455-2143, Pages 62-67.

  • Sahil Aggarwal, Shivam Verma, Ved Prakash Singh, VaibhavVarshney, “Elucubration of Aspect Oriented Programming”, International Journal of Engineering Applied Sciences and Technology, 2016 Vol. 1, Issue 3, ISSN No. 2455-2143, Pages 50-54.

  • Kumar, Arvind, and Bashir Alam. "A dynamic approach for fault tolerance with voltage scaling." In Green Computing and Internet of Things (ICGCIoT), International Conference on, pp. 1522-1525. IEEE, 2015.

  • Kumar, Arvind, and Bashir Alam. "An efficient checkpointing approach for fault tolerance in time critical systems with energy minimization." In Computing, Communication &  Automation (ICCCA), International Conference on, pp. 704-707. IEEE, 2015.

  • Kumar, Arvind, and Bashir Alam. "Improved EDF Algorithm for Fault Tolerance with Energy Minimization." In Computational Intelligence & Communication Technology (CICT), IEEE International Conference on, pp. 370-374. IEEE, 2015.

  • Diwaker, Maitreyee Dutta, “Assesment of Feature Extraction Techniques for  Hyperspectral Image Classification” Publisher IEEE, published in Computer   Engineering and Applications (ICACEA),  page no- 499-502, 19-20 March 2015.

  • Sahil Aggarwal, SaruDhir. Swift Tack: A New Development Approach .ICICT 2014, 2014/2/7, IEEE Explore ISBN 978-1-4799-2900.

  • Sahil Aggarwal, Vikas Deep. Speculation CMMI in Agile methodology. ICACCI 2014, 2014/9/24,IEEE Explore ISBN 978-1-4799-3078-4.

  • Alam, Bashir, and Arvind Kumar. "A real time scheduling algorithm for tolerating single transient fault." In Information Systems and Computer Networks (ISCON), International Conference on, pp. 11-14. IEEE, 2014. doi: 10.1109/ICOEI.2018.8553850

  • Kumar, Arvind, and Bashir Alam. "Real time scheduling algorithm for fault tolerant and energy minimization." In Issues and Challenges in Intelligent Computing Techniques (ICICT), 2014 International Conference on, pp. 356-360. IEEE, 2014.

  • Arvind Kumar, Pawan Singh Mehra, Gagan Gupta and Manika Sharma “Enhanced Block Playfair Cipher” presented in International Conference QSHINE-2013, Springer
    LNICST 115, pp. 689–695, 2013,  SCOPUS Indexed, DBLP.

     

  • SandhyaAvasthi, AvinashDwivedi “Temporal Mobile Sequential Pattern Mining Via Clustering and Time Segmentation “AEET-2013 a conference by IIT-BHU Varanasi.

  • ShikhaSaxena,” Architectural description of new fault tolerant computer network topology by using CEF Switch ”  presented in national conference on cyber security in institute of information technology and management ,New Delhi held on 7 March 2013.

  • Umang Kant, Dipti Trivedi, “Scheduling Algorithms and their Applications for Cloud Networked Robotics: A Study”, International Conference on Technical and Innovative Advancement in Computing and Communication Engineering, May 2013.

  • Sahil Aggarwal, SaruDhir, Ground Axioms To Achieve Movables: Methodology 2013, IJCA 201, 2013/1/1, IJCA ISBN 10.5120/11908-8006.

  • ShikhaSaxena,"Optimization of various Network Failure" presented in third Doctoral Conference at Hindustan College, Mathura on 19 May  2012

  • Arvind Kumar, Ranvijay, Rama Shankar Yadav, SmritiAggrawal. "ENERGY MANAGEMENT FOR ENERGY HARVESTING REAL TIME SYSTEM WITH DYNAMIC VOLTAGE SCALING" Communications in Computer and Information Science, SpringerLink 2011, Volume 197, Part 2, SCOPUS, DBLP, pp 536-548.

  • Arvind Kumar, Anjali Jain “An Efficient Checkpointing Scheme for Tolerating Fault in Real Time System” International conference, FTICT-2011.

  • ShikhaSaxena,"StRing Topology"   Presented on National Conference at IMR, Ghaziabad 22 April 2011

  • ShikhaSaxena,“Is Wireless network  purely s Secure"  Paper published at National Conf11erence at Mahamaya Technical University, Noida, May 2011

  • ShikhaSaxena,"Congestion and Power aware Reliable Routing Protocol for Mobile Ad-hoc Network" Paper published at international Conference of W3C India 2011.

  • ShikhaSaxena,”Designing Issues in the future of mobile communication system” published in International Conference on Global Trend in Technology in IET, Alwar Rajisthan,15 Oct 2011.

  • Ms.VaishaliPuranik, “Content Based Image Retrieval Using Multiple Descriptors” international conference on Information Technology And Business Intelligence (ITBI-09),  6-8 NOV, 2009, Mumbai India, IEEE-2009.

     

  • SumanLataTripathi, SandhyaAvasthi,”Performance Enhanced Unsymmetrical FinFET and its Applications, in EDCON, Kolkata, a conference by IEEE

  • SumanLataTripathi, SandhyaAvasthi “High performance Low leakage pocket SixGe1-x Junction-less Single-Gate Tunnel FET for 10 nm Technology in E

  • VishuTyagi, “Emerging Trends in Software Engineering: Software as a Service” ,ANNUAL CONFERENCE OF VijnanaParishad of India& NATIONAL SYMPOSIUM ON Recent Developments in Applicable Mathematics & Information Technology, Jaypee Institute of Engineering & Technology (JIET), Distt. Guna – M. P, INDIA, December 4-6, 2009

  • Manu, Sandeep Saxena, GoutamSanyal, Umang Kant, “Secure and Efficient Framework for Task Execution in Cloud Environment”, at IEEE International Conference on Advances in Computing, Communication Control and Networking.

  • ShashiBhushan, An investigation and performance analysis of AODV, DSR and DSDV Routing Protocols in Mobile Ad Hoc Network using NS2 simulator: The Paper was presented in TEICC international conference held in Bikaner. The ISBN no is - ISBN : 978-81-923777-0-4

  • ShashiBhushan, Ant Colony Based Time Investigation for Route- Discovery, Maintenance and QoS analysis of ACO Routing Algorithm in MANET’s using NS2 : This paper was presented in TIACCE international conference held in Marudhar Engineering College, Bikaner.

  • Sahil Aggarwal, JayantKashyap, “Grasp Performance Improvement Using Active Learning in Vision Based Hand Prosthesis”, IJEAST, Vol 1, Issue 3, ISSN No. 2455-2143, Pages 55- 61.

  • VishuMadaan,DimpleSethi et.al, “Public Network Security by bluffing the intruder through encryption over encryption using public key cryptography”, International Conference of Advance Informatics for Computing Research,CCIS 712, pp. 249-257,Jalandhar .

  • Megha Yadav, Usha Sharma and A N Mishra, “ Suitable Feature Extraction Technique for Hindi Digit Speech Recognition”, Advances in Computer Science and Information Technology, Vol. 2, No. 12, pp. 50-53, July- Sept 2015.

  • Jyoti Guglani and A N Mishra, “Comparative Study of Feature Extraction Techniques for Punjabi Speech Recognition”, International Journal of Science, Technology & Management, Volume No.04, Issue No. 02, February 2015.

  • A. N. Mishra, Mahesh Chandra, Astik Biswas and S. N. Sharan, “Hindi phoneme-viseme recognition from continuous speech”, Int. J. Signal and Imaging Systems Engineering- Inderscience, Vol. 6, No. 3, 2013.

  • Sharmila, A. N. Mishra, Neeta Awasthy “Hybrid Features for Speaker Independent Hindi Digits Recognition Using HTK Toolkit”, International Journal of Scientific & Engineering Research, Volume 4, Issue 12, 2013.

     

  • A. N. Mishra, Mahesh Chandra, Astik Biswas and S. N. Sharan, “Robust Features for Connected Hindi Digits Recognition”, Int. Journal of Signal Processing, Image Processing and Pattern Recognition, Vol. 4, No. 2, pp. 79–90,  June, 2011.

  • Sharmila Verma and A N Mishra, “Analysis of Speech Recognition Techniques on the Hindi Speech Digits Database”, International Journal of Electronic Engineering Research, Volume 3, No. 3, pp. 321-327, 2011.

  • A.N. Mishra, Astik Biswas and Mahesh Chandra, “Isolated Hindi Digits Recognition: A Comparative Study”, Int. Journal of Electronics and Communication Engineering, Vol. 3, No.1, pp. 229-238, (2010).

  • Pawan Kumar, Astik Biswas, A .N. Mishra and Mahesh Chandra, “ Spoken Language Identification Using Hybrid Feature Extraction Methods”, Journal of Telecommunications, Volume 1, Issue 2, March 2010.

  • Bhawna Tiwari, Archna Sharma, Malti Gautam Singh, Bhawana Rathi, “Automatic Vehicle Number Plate Recognition System using Matlab”, IOSR Journal of Electronics and Communication Engineering (IOSR-JECE), Volume 11, Issue 3, Ver. I (May-Jun .2016).

  • Malti Gautam Singh, Archana Sharma, Bhawna Tiwari , “ Smart E-stick for VisuallyImpaired” International Journal of Advance Research in Computer Science and Software Engineering , Vol 6, Issue 12 ( December 2016).

  • TK Basak, Malti Gautam, Madhu Bala, “Implementation of Artificial Neural Network for Quantized Stages of cancer”, Proceedings of IEEE sponsored  International Conference on Communication and Electronics(ICCE), 19th -20th October 2012, pp 397-399.

  • Asha Gautam, Malti Gautam, Abhishek Gautam, “Implementation of ANFIS for the Classification of Cancer Stages”, International Journal of Advance Research in Computer Science and Software Engineering, Volume 4 Issue 4 publishes, April- 2014.

  • P Ojha, Malti Gautam, H Shekhar, “Self-Controlled Soot Blowing Process for Tangential Fired Boiler”, Proceedings of IEEE sponsored  International Conference on Electrical, Electronics, Signals, Communication and Optimization(EESCO),Vizag,24-25 Jan 2015,pg 220-225.

  • Ashutosh Agarwal “Balancing Inverted Pendulum by Angle Sensing Using Fuzzy Logic Supervised PID Controller Optimized by Genetic Algorithm”, Communicated for the Publication to Sensor & Transducers Journal, Reg. No. ST-20110702-01,2011.

  • Ashutosh Agarwal , “A Novel Method to Balance Inverted Pendulum by Angle Sensing Using Fuzzy Logic supervised PID Controller”- Sensors & Transducers Journal, Vol.126 No. 3, pp. 92-100, ISSN 1726-5479,2011. (e-Impact Factor-205.676)

  • Sangeeta Sharma, Deepak Gupta, V K Gupta, Mahesh Chandra, “A Review on Transform Domain Adaptive Filters”, International Journal of Computer Science and Information Technologies, Vol. 5 (5) , pp. 6609-6613, 2014.

  • Sakshi Gaur, Mahesh Chandra, V K Gupta and  Deepak Gupta, “Comparative analysis of feed forward and feedback FxLMS algorithm”, Journal of basic and applied engineering research, vol 1, no.11,2014.

  • Aghna Tajamul, Deepak Kumar Gupta, and V. K. Gupta, “Analysis of noise signal cancellation using LMS, NLMS, and RLS Algorithms of Adaptive Filter”, International Journal of Advanced Research in Electrical and Electronics Engineering, Vol. 2, issue 14,  pp. 50-53, Dec 2015.

  • V. K. Gupta, D. K. Gupta, Mahesh Chandra, “Variable Forgetting Factor based Real Time Noise Canceller ”, communicating in International journal of computational vision and robotics(IJCVR),2016.

     

  • T. K. Basak, T. Ramanujam, V. Cyrilraj, G. Gunshekharan, Asha Khanna, Deepali Garg, Poonam Goyal, Arpita Gupta ‘pH Homeostasis of a Biosensor in Renal Function Regulation Linked with UTI’. Vol. 105 in international journal of sensor and transducer, Issue 6, June 2009, pp.127-134

  • T.K.Basak, T.Ramanujam, JC Kavitha, Poonam Goyal, Deepali Garg, Arpita Gupta , Suman Halder “pH Homeostasis linked with Capacitance Relaxation Phenomena and Electrostrictive Energy in Cancer Cells", Sensor and Transducer, page-147,Vol. 109, Issue 10, October 2009.

  • Deepak Kumar Gupta, Vijay Kumar Gupta, Mahesh Chandra, Achtuta Nand Mishra, “New Optimal Variable Step Size-Adaptive Regularized-Affine Projection Algorithm for Noise Cancellation from Audio Signals”, International Journal of Speech Technology. DOI: 10.1007/s10772-019-09591-z. Indexed in: SCOPUS, ESCI.[IF-0.94]

  • Deepak Kumar Gupta, Vijay Kumar Gupta, Mahesh Chandra, Gaurav Verma, “Real Time Implementation of Parallel Architecture Based Noise Minimization from Speech Signals on FPGA”. Wireless Personal Communications (2018). DOI: 10.1007/s11277-018-5889-9. Indexed in: SCI Expanded, SCOPUS. [IF-1.2000].

  • Deepak Kumar Gupta, Vijay Kumar Gupta, Mahesh Chandra, Biswajeet Pandey,  “Performance Analysis of MSFRLS-VFF Based Real-Time Adaptive Noise Canceller with RLS and APA Algorithms using TMS320C6713 Processor”, Wireless Personal Communications, vol. 102, no. 4,2018. DOI: 10.1007/s11277-018-5929-5. Indexed in: SCI Expanded, SCOPUS. [IF-1.2000].

  • Deepak Gupta, V K Gupta, Mahesh Chandra, “Performance Comparison of Different Affine Projection Algorithms for Noise Minimization from Speech Signals”, International Journal of Future Generation Communication and Networking, Vol. 10, No. 1, pp. 261-270, 2017. Indexed in:  SCOPUS, ESCI.

  • D. K. Gupta, V. K. Gupta and Mahesh Chandra, “Review Paper on Linear and Nonlinear Acoustic Echo Cancellation”, Proceedings of the  3rd International Conference on Frontiers of Intelligent Computing: Theory and Applications (FICTA- 2014), Vol. 2, pp 465-473,(SPRINGER  BOOK CHAPTER- Indexed in- SCOPUS, Google Scholar and Springer link)

  • V. K. Gupta, D. K. Gupta, Mahesh Chandra, “Real time noise canceller using modified sigmoid function RLS algorithm”, proceedings of International Conference on Computational Vision and Robotic(ICCVR-2014), Series Vol. 332, pp 63-70,(SPRINGER  BOOK CHAPTER- Indexed in- SCOPUS, Google Scholar and Springer link)

  • Sangeeta Sharma, Deepak Gupta, V K Gupta, Mahesh Chandra, “A Review on Transform Domain Adaptive Filters”, International Journal of Computer Science and Information Technologies, Vol. 5 (5) , pp. 6609-6613, 2014

  • Sakshi Gaur, Mahesh Chandra, V K Gupta and  Deepak Gupta, “Comparative analysis of feed forward and feedback FxLMS algorithm”, Journal of basic and applied engineering research, vol 1, no.11,2014.

  • Aghna Tajamul, Deepak Kumar Gupta, and V. K. Gupta, “Analysis of noise signal cancellation using LMS, NLMS, and RLS Algorithms of Adaptive Filter”, International Journal of Advanced Research in Electrical and Electronics Engineering, Vol. 2, issue 14,  pp. 50-53, Dec 2015.

  • Deepak Gupta, prachi mohan, alok dubey, “A review on reversible logic gate”, in: processdings of 1st National Conference on Recent Trends in Electronics and Electrical Engineering (NCRTEEE-2017), 16 &17th Feb, 2017, IPEC gzb, India.

  • Deepak Gupta, V K Gupta, Mahesh Chandra, “Real Time Implementation of Parallel Architecture Based Noise Minimization from Speech Signals on FPGA”, In: 2nd Global Conference on Wireless and Optical Communications (GCWOC’2017), Sept 18-20, 2017, Spain.

  • Deepak Gupta, V K Gupta, Mahesh Chandra, “Performance Analysis of MSFRLS-VFF Based Real Time Adaptive Noise Canceller with RLS and APA Algorithms using TMS320C6713 Processor, In: 2nd Global Conference on Wireless and Optical Communications (GCWOC’2017), Sept 18-20, 2017, Spain.

  • Guangyue Shi, T.K. Basak, T. Ramanujam, Madhubala Bhatt, Deepali Garg, Richa Garg, Sudheer Patil, Narendra Murtare, S. Jeybalan.”Analysis of E. Coli Environment Related to the stages of Cancer” Journal of Medicine and Medical Sciences Vol. 2(1) pp. 601-608 January 2011.

  • T. K. Basak, T. Ramanujam, S. Jeybalan, Madhubala Bhatt, Deepali Garg, Richa Garg.“Growth Factor Inhibiting PKC Sensor in E-coli Environment Using Classification Technique and ANN Method”. Vol. 126, Issue 3, March 2011, pp.125-133 in Sensors & Transducers Journal.

  • T.K. Basak, Jian Ni, Guangyue Shi, Deepali Garg, Madhubala Bhatt, T.Ramanujam, Sudheer Patil, Narendra Murtare, S. Jeybalan Analysis of Oxidative Phosphorylation of E.Coli in VHDL focused on gene sequence alteration. Journal of Medicine and Medical Science Vol. 2(3) pp. 758-762, March 2011.

  • Madhubala Bhatt, Deepali Garg Intelligent Traffic Management for Metropolitan Cities using  Image Processing in International Organization of Scientific     Research Vol. 11(3), June

  • Praween Kumar Srivastava, Saurabh Singh, Fractal –shaped micro strip end coupled-line band pass filter, Vol-5, Issue-6, June 2015 (ISSN: 2277128X), IJARCSSE.

  • Praween Kumar Srivastava, Saurabh Singh, Design and Simulation of T shaped patch Antenna with coaxial feed using IE3D, Vol-1, Issue-2, June 2016, IJERAI.

  • Alok Dubey, Design and optimization of Patch Antenna for Personal communication system using IE3D, Proceeding of NCCN-10, 12-13 March 10

  • Sangeeta Patel Kardam, “A Novel Approach based on Noise and Parameter Estimation for Image Enhancement,” in Proc. IRAJ-IACEER 2013, August11, 2013,Pune,India, Volume- 1, Issue- 6.

  • Ashok Yadav“High Gain Microstrip Antenna with Plus Sign Slot for Wireless Application”, MIT International Journal of Electrical and Instrumentation Engineering Vol. 3, No. 1, Jan. 2013, pp. 12–14 ISSN No. 2230-7648 ©MIT Publications.

  • Ashok Yadav” A Review on Wearable Textile Antenna” Journal of Telecommunication, Switching Systems and Networks Volume 2, Issue 3 ISSN: 2454-6372(online) Dec 2015.

  • Piyush Sharma, Ashok Yadav, Vinod Kumar Singh “Design of Circularly Polarized Antenna with different Iteration for UWB applications” LNEE-Springer book chapter, jan2018.

  • Ashok Yadav, Ashutosh Agarwal, Saurabh Singh, A.N.Mishra “A Study and analysis of circularly polarized wearable textile antenna” National Conference on Design and Innovation at IIT Delhi june 2017.

  • Priti Singh, Arnab Chakraborty and Ashok Yadav “Design and Analysis of Conventional Antennas for the Applications in Millimeter-Waves” 2016 Second International Conference on Computational Intelligence & Communication Technology, IEEE conference 2016.

  • Ashok yadav, Vinod Kumar Singh, Manu Chaudhary “A Review on Wearable Textile Antenna” Journal of Telecommunication, Switching Systems and Networks Volume 2, Issue 3 ISSN: 2454-6372(online) Dec 2015.

  • Ashok Yadav “Design of single band rectangular patch antenna for wlan application” VSRD International Journal of Electrical, Electronics & Communication Engineering, Vol. VI Issue I February 2016e- ISSN: 2231-3346, p-ISSN: 2319-2232

  • Hari Mohan Rai, A unique feature extraction using MRDWT for automatic classification of abnormal heartbeat from ECG big data with Multilayered Probabilistic Neural Network classifier, Applied Soft Computing, (2018)https://doi.org/10.1016/j.asoc.2018.04.005 (Elsevier, SCI Journal).

  •  Hari Mohan Rai, Kalyan Chatterjee, A Novel Adaptive Feature Extraction for Detection of Cardiac Arrhythmias Using Hybrid Technique MRDWT & MPNN Classifier from ECG Big Data, Big Data Research (2018)https://doi.org/10.1016/j.bdr.2018.02.003 (Elsevier Journal).

  • Hari Mohan Rai and Arpita Gupta, “A Novel technique (Trick) to determine the output and draw its waveform of Diode Clamper Circuits” IJARCS, Volume 8 Issue 5 May-June 2017 (UGC Approved Journal).

  • Hari Mohan Rai et al., “Design of Smart Solar Inverter System”, International Journal of Engineering and Advanced Technology (IJEAT)’, ISSN: 2249-8958 (Online), Volume-6, Issue- ICDSIP17, Page No.: 208-210, March 2017.

  • Vivechana Dubey, Hari Mohan Rai, “GDI Technique based Low power and Area Proficient 4-bit Arithmetic Logic Unit”, International Journal of Engineering Research and Applied Innovation (IJERAI), Vol.1, Issue 2, Pg. 5-10, June 2016

  • Piyush Sisodiya, Hari Mohan Rai, Ishu Agrawal, “DESIGN OF SOLAR POWERED WIRELESS CHARGER FOR SMARTPHONES”, International Research Journal of Engineering and Technology, Vol.3 Issue 5, May-2016

     

  • Hari Mohan Rai, Kalyan Chatterjee, “De-Noising of ECG Signal using Multiresolution Wavelet Transform”, International Journal of Engineering Research and Applied Innovation (IJERAI), Vol.1, Issue 1, Pg. 1-7, May 2016.

  • Nisha, Hari Mohan Rai, “A New Algorithm for Tumor Segmentation of Brain MRI Images”, International Journal for Scientific Research & Development, Vol. 3, Issue 04, 2015.

  • Hari Mohan Rai, Salma Khan, Yogesh Chauhan, Sandeep Chauhan, “Issues on Problem Solving in Mathematics”, International Journal of Research, Vol.1, Issue-10, Pg 1705-1712, Nov. 2014

  • Hari Mohan Rai, Salma Khan, Yogesh Chauhan, Sandeep Chauhan, “On Actor Network Theory”, International Journal of Research, Vol.1, Issue-10, Pg 1705-1712, Nov. 2014

     

  • Hari Mohan Rai et al., “R-Peak Detection using Daubechies Wavelet and ECG Signal Classification using Radial Basis Function Neural Network”, in J. Inst. Eng. India Ser. B (2014) 95:63-71 DOI 10.1007/s40031-014-0073-4 (Springer Journal).

  •  Hari Mohan Rai et al.,ECG signal processing for abnormalities detection using multi-resolution wavelet trans- form and Artificial Neural Network Classifier, Measurement Journal, Volume 46, Issue 9, Pages 3238–3246, November 2013, (http://dx.doi.org/10.1016/j.measurement.2013.05.021. (Elsevier, SCI Journal)

  • Hari Mohan Rai, Anurag Trivedi, “De-noising of ECG waveforms using Multi-resolution Wavelet Transform”, International Journal of Computer Application, vol. 45.issue 18, pp. 25-30, MAY-2012.

  • Hari Mohan Rai, Anurag Trivedi, “Classification of ECG Waveforms for Abnormalities Detection using DWT and Back Propogation Algorithm”, International Journal of Advanced Research in Computer Engineering & Technology, Volume 1, Issue 4, pp.-517-520, June 2012, ISSN: 2278 – 1323.

  • Hari Mohan Rai, Rajesh Pandey and Vinod Sagar, “Signal Classification of Electrocardiogram Signal using Wavelet Transform”, DIGITECH: An International Journal of Computers, Vol. 3, No. 10, pp. 1-9, May-2013. ISSN: 2229-4597.

  • Arunabha Debnath, Hari Mohan Rai, “Deblurring and Denoising of Magnetic Resonance Images using Blind Deconvolution Method, International Journal of Computer Applications (0975 – 8887), Volume 81 – No.10, November 2013.

  • Seema Das, Hari Mohan Rai, RinkuSanghwa, “PID AND FUZZY-PID CONTROLLER FOR VARIOUS ELECTRICAL MACHINE APPLICATIONS: A COMPARATIVE STUDY”, International Journal of Advanced and Innovative Research (2278-7844), Vol. 2, Issue 11, Nov-13.

  • SEEMA DAS, Hari Mohan Rai, Shailey Gulati,RinkuSanghwan, “LOAD FREQUENCY ANALYSIS OF AUTOMATIC GENERATION CONTROL SINGLE AREA NETWORK USING ANN AND GA”, International Journal of Advanced and Innovative Research (2278-7844), Volume 2, Issue 11, Nov-13.

  • Hari Mohan Rai, Vishal Phaugat, Subham Gupta, RohitThakran, “EFFECT OF BINDER ON VISCOSITY WITH SHEAR RATE”, International Journal of Emerging Trends in Electrical and Electronics (IJETEE) (ISSN 2320-9569), Volume 9, Issue 2, November 2013.

  • Hari Mohan Rai, Chandra Shekhar Singh, Arun Kumar, Anish Kumar, Abhishek Sharma, “AUTOMATIC WIRELESS BATTERY CHARGER FOR PERMANENET PACEMAKER”, International Journal of Advanced and Innovative Research (2278-7844) , Vol. 2, Issue 12, Dec-13.

  • Arpita Gupta, Novel Method to Enhance Efficiency of Solar Energy System’ published in 2013, International Journal of Advanced and Innovative Research (2278-7844) / 428/ Volume 2 Issue 10.

  • Arpita Gupta,A Simulation of Measurement of WBC using MEMS’. Published in 2012, INTERNATIONAL JOURNAL OF ADVANCED AND INNOVATIVE RESEARCH (IJAIR), ISSN: 2278-7844.

  • Arpita Gupta,  Diabetes and Status of Specific Gravity of Urine’2013, International Journal of Advanced and Innovative Research (2278-7844) / 327 / Volume 2 Issue 10.

  • Arpita Gupta, Effect of Diabetes on Dielectric Property of Blood Plasma’2014, International journal of modern research, International Journal of Modern Engineering Research (IJMER), (2249-6645),

  • Arpita Gupta, ‘Modeling Of Dielectric Properties Of Cancer  Cell And Evaluation Of Cancer Stages: A Review’ 2014, International Journal Of Recent Scientific Research Research Vol. 5, Issue, 2, Pp.443-448

  • Arpita Gupta, Change In Blood Capacitance With Gestational Age Linked With Data Mining’2015, International Journal Of Pure And Applied Research In Engineering And Technology, IJPRET, 2015; Volume 3 (9)

  • Arpita Gupta, Change Of Capacitance In Cancerous Cell’2015, Stm Journals (ISSN: 2319-3387) Volume 4, Issue 1

  • Arpita Gupta, Effect Of Glucose on Cell Capacitance Simulation in MEMS’2015, International Journal of Research in Engineering and Applied Sciences (ISSN 2249-3905), VOLUME 5, ISSUE 7.

  • Arpita Gupta, Role of Dielectric Property of Blood in Detection of Renal Failure’, 2015, American Journal of Biomedical Sciences ISSN: 1937-9080 nwpii.com/ajbms

  • Arpita Gupta, A novel method for measurement of hemoglobin using capacitance of blood’2015, ICSET international  conference in Dubai

  • Arpita Gupta, Gps Enabled Digital Advertisement System With Message And Audio Features’2016, Advanced Research in Electrical and Electronics Engineering, ISSN 2349-5804.

  • Radhika Goel and Richa Gupta, "Redesigning of the Construction of Symmetrical RVLCS Based On Graph Model.", International Journal of Information & Computation Technology, vol. 4, no. 11, pp. 1063-1068, 2014.

  • Sakshi Gupta, Kanika Dutta, Manjeet Kaur, “Fast Algorithm for Recognition of 2D Barcode: A Review”,International journal of Emerging Trends in Science and Technology, Volume 03 Issue 07 July 16. (Accepted)

  • Sakshi Gupta, Shefali Nagar, “An Approach towards Automatic Abandoned Luggage Segmentation & Detection”, Advanced Research in Electrical and Electronic Engineering, p-ISSN: 2349-5804; e-ISSN: 2349-5812 Volume 3, Issue 2 January-March, 2016, pp. 110-113.

  • Sakshi Gupta, Neeta Yadav, “Design of Low Power Voltage Controlled Ring Oscillator using MTCMOS Technique”, International Journal of Science & Research (IJSR), ISSN- 2319-7064, Volume 3 Issue 7, Impact Factor:3.358,  July 2014.

  • Sakshi Gupta, Sunil Kumar, "Analysis of hand Gesture Recognition", published in International Journal of Advanced Research in Computer Science & Software Engineering (IJARCSSE), ISSN: 2277-128x, Impact Factor: 2.080.

  • Sunil Kumar, Sakshi Gupta, “A Novel Technique for Human Face Detection Based on Colour Segmentation and Template Matching”, published in International Journal of Engineering Science & Advanced Technology, ISSN: 2250-3676, ICV: 5.37, Volume-2, Issue-3, Page 567-576, May, 2012.

  • Sunil Kumar, Sakshi Gupta, “Real Time Face Recognition using Steerable Filters and Template Matching”, published in International Journal of Advanced Research in Computer Science, ISSN: 0976-5697, ICV: 5.47,Volume-3, Number-3, Page 551-555, June, 2012

  • Sujata Gaur, Bandna, “Analysis of selfexcited capacitances for selfexcited induction generator for different operating condition using fuzzysystem”, published in IJAREEIE, Volume-6, Issue2, Feb 2017

  • Sujata Gaur, Bandna, “Simulation of transient behavior of DC motor using MATLAB/Simulink”, published in IJAREEIE, Volume-6, Issue2, Feb 2017

  • Singh S.,Murtaza Q., Pandey S., Walia R., Rashid M., “Characterization of NiCr, CrC and Mo powders forthermal spray coatings”; ‘International Conference on Advances in Materials, Manufacturing and Applications (AMMA – 2015)’ on April 9 -11th, 2015 in National Institute of Technology, Tiruchirappalli, India.

  • Singh S., Rashid M., MurtazaQ.Yuvraj N., “Friction Stir Welding, Process Parameters and Materials Issues-A review”; ‘An International Conference & Exhibition on Cutting Edge Technological Challenges in Mechanical Engineering (CETCME – 2015)’ on 21 – 22nd March, 2015 in Noida Institute of Engineering and Technology, Greater Noida, India.

  • Singh S.,Murtaza Q., Walia R., Pandey S., Ahluwalia S., “Nano-Composite Classification, Deposition and Characterization Techniques – A Review”; TEQIP – II Sponsored National Conference on ‘Latest Developments in Materials, Manufacturing and Quality Control’ (ISBN 978-93-5196-055-3) on 19 – 20thFebruary, 2015 in GianiZail Singh Punjab Technical University Campus, Bathinda, India.

  • Singh S., “Microstructure Analysis of Piston Rings and Wear Resistance of Coating by Physical VapourDeposition”; ‘The 4th International Symposium on the Fusion science and Technologies 2015 (ISFT2015)’ on January 12-16th, 2015 in RUS, Huntra campus, PraNakhon Si Ayutthaya, Thailand.

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, AlokeshPramanik Tribological behavior of surface coating by PVD-A Review International conference on “Evolutions in manufacturing: Technologies and Business Strategies for Global competiveness”. ICEM-2016 November 12-13-2016.

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar and AlokeshPramanik “Application of Fuzzy Logic Model for study the wear behavior of Chrome Coating by physical vapour deposition (PVD)” International Conference on Advances in Computing and Data Sciences (ICACDS-2016) at Nov.11-12 2016.

  • K. Satyajeet and K. Shailesh Singh comparative study on consolidation of SiC–Al and SiC–B4C–Al cermet,” Int. J. Trend Res. Dev., 3, URL: ISSN: 2394-9333.

  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., &Basak, A. K. (2018). Tribological behaviour of chromium nitride coating. International Journal of Applied Engineering Research, 13(6), 23-25.

  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., &Basak, A. K. (2018). Tribological behaviour of chromium nitride coating. International Journal of Applied Engineering Research, 13(6), 23-25.

  • Yadaw, R. C., Singh, S. K., Chattopadhyaya, S., Kumar, S., & Singh, R. C. (2018). Tribological behavior of thin film coating-a review. International Journal of Engineering & Technology, 7(3), 1656-1663.

  • ChandraYadaw, R., Singh, S. K., & Singh, S. C. S. K. R. (2018). Comparative study of surface coating for automotive application-A review. International Journal of Applied Engineering Research, 13(6), 17-22.

  • Mohd. Rashid, Shailesh Kumar Singh, Sanjeev Kumar, Somnath Chattopadhyaya. (2018). Optimization of process parameters for tensile strength and micro hardness of friction stir welded AA6082 specimen using Response surface methodology (RSM). International Journal of Applied Engineering Research, 13(6), pp. 170-174.

  • Kumar, S., Singh, S. K., Kumar, J., &Murtaza, Q. (2018). Synthesis and Characterization of Al-alloy by Mechanical alloying. Materials Today: Proceedings, 5(2), 3237-3242.

  • Rashid, M., Yuvraj, N., &Singh, S. K. (2016). Micro Structural and Mechanical Behaviours of Nano-TiC-Reinforced AA6082 FSW Joints. Fusion of Science & Technology, 18-22.

  • Kumar, S., Kumar, S., & Mishra, S. C. (2018). Processing and Characterization of Fly-ash Compacts. Materials Today: Proceedings, 5(2), 3396-3402.

  • Kumar Singh, S., Tiwari, R. M., Kumar, S., & Kumar, S. (2018). Mechanical Properties and Microstructure of Al-5083 by TIG. Materials Today: Proceedings, 5(1), 819-822.

  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., & Gupta, N. (2018). Influence of Nano-particle on the Wear behaviour of Thin Film Coatings A Review. International Journal of Applied Engineering Research, 13(6), 4053-4058.

  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., &Basak, A. K. (2019). Effect of lubrication on the wear behaviour of CrN coating deposited by PVD process. International Journal of Surface Science and Engineering, 13(1), 60-78.

  • Singh, S. K., Chattopadhyaya, S., Pramanik, A., & Kumar, S. (2018). Wear behavior of chromium nitride coating in dry condition at lower sliding velocity and load. The International Journal of Advanced Manufacturing Technology, 96(5-8), 1665-1675.

  •  A new Heuristic Method i.e. RPW Method and Genetic algorithm techniques (hybrid method) For Evaluating Multi Product Assembly Line Balancing – A Case Study IJAR Volume 5, (2), 155-157

  •  A new Heuristic Method i.e. RPW Method and Genetic algorithm techniques (hybrid method) For Evaluating Multi Product Assembly Line Balancing – A Case Study IJAR Volume 5, (2), 155-157

  • Effect of Skin-Core Delamination on the Interlaminar Stress Distribution in Sandwich Composites IJARI Volume 5, (1), 96-99.

  • COMPARATIVE ANALYSIS OF BIODIESEL AS A ADDITIVE WITH PURE DIESEL IN SINGLE CYLINDER FOUR STROKE DIESEL ENGINE PROCESSES IJARI Volume 5, (1), 137-140.

  • Effects of Dual-Fuel at Different Engine Parameters IJARI Volume 5, (1), 86.

  • Manoj Kumar Solanki Rahul Kumar Jeeoot Singh Free vibration analysis of FGM platesInternational Journal of Innovations in Engineering and Technology (IJIET) Volume 6, Issue 3, February 2016, pp 351-358

  • Rahul Kumar Manoj Kumar Solanki Jeeoot Singh Comparative Studies of Different Theories for Vibration Analysis of FGM Plate by using Higher Order Shear Deformation TheoryInternational Journal for Scientific Research & Development| Vol. 3, Issue 12, 2016 |2321-0613 pp347-350.

  • Manoj Kumar SolankiSabin Kumar MishraJeeoot SinghThermal bending of Laminated Plates Using Meshfree Method IJAER Volume 10 44535-44538.

  • M.K. Solanki Meshfree Approach for Linear and Nonlinear Analysis of Sandwich Plates: A Critical Review of Twenty Plate Theories.  Volume 69, 93-103.

  • Shukla, Rakesh kumar, Srivastava,V.K.,(2018).ANALYSIS OF AIRFLOW THROUGH COMPLIANT HUMAN AIRWAYS USING FLUID STRUCTURE INTERACTION. INCOM18: Proceedings of the 1st International Conference on Mechanical Engineering.Jadavpur University Kolkata India January 4 – 6, 2018. Paper No. INCOM18-218

  • Shukla Rakesh,Kumar,(2017). Effect of Skin-core delamination on the interlaminar stress distribution in sandwich composites. The international journal of advance research and innovation. Volume 5, Issue 1 (2017) 96-99 ISSN 2347 – 3258.

  • Srivastav V.K.,Shukla,R.K.,Paul,A.R.,Jain,A.,(2017) Comparative Analysis of Fluid-Structure Interaction between Rigid and Compliant Human Respiratory. Int. J. of Biomedical Engineering and Technology, Vol. X, No. Y, xxxx (In production)-19322

  •  Kumar, A., Sachendra, (2017). Development in Augmented Turbine Technology. International Journal of Trend in Research and Development, Volume 4(1), 2394-9333.

  •  Mishra, A., Mishra, P., Sachendra,(2015).Six Sigma methodology in a plastic injection moulding : A case study. International Journal of Industrial Engineering and Technology, IJIET Volume 7, Issue 1 (2015) 15-30

     

  • Shailesh Kumar Singh, Satyajeet Kumar, Jay Shankar kumar, Sitikantha Behera.(2016) Synthesis and Wear Behaviour of (Al, Cu) 3Ti Powder Blend by Mechanical Alloying.

  • K. Satyajeet and K. Shailesh Singh comparative study on consolidation of SiC–Al and SiC–B4C–Al cermet,” Int. J. Trend Res. Dev., 3, URL: ISSN: 2394-9333.

  • Kumar, S., Singh, S. K., Kumar, J., &Murtaza, Q. (2018). Synthesis and Characterization of Al-alloy by Mechanical alloying. Materials Today: Proceedings, 5(2), 3237-3242.

  • Kumar, S., Kumar, S., & Mishra, S. C. (2018). Processing and Characterization of Fly-ash Compacts. Materials Today: Proceedings, 5(2), 3396-3402.

  • Kumar Singh, S., Tiwari, R. M., Kumar, S., & Kumar, S. (2018). Mechanical Properties and Microstructure of Al-5083 by TIG. Materials Today: Proceedings, 5(1), 819-822.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma , 7-8 May 2011, A case study on practice & performance of eco/green procurement & green supply chain in small sized enterprises in India, National Conference on Excellence in Technology & Management, pp258-260.[ISBN:978-93-81361-04-7].

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, Bhanu P Srivastava, 12-13 March 2011, Implementation of cleaner production towards environmental quality improvement of SMEs in India, National Conference on Emerging Frontiers in Mechanical Engineering for New Generation Industry ,pp93-99. [ISBN: 978-81-8424-667-4]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma , 11-13 Feb 2011, Performance of eco-procurement practices and green supply chain performance of SMEs in Delhi, National Conference on Managerial Excellence in 21st Century,pp21.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 1-2 May 2010,Greening supply chain: Indian enterprises, National Conference on Recent Trends in Banking & Financial Sector ,pp65.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma ,November 19–21, 2010, An empirical study of the implementation of green supply chain management practices in the Indian medium sized manufacturing industry of automobile parts and their relation to organizational performances, National Conference on Eco-friendly Manufacturing for Sustainable Development, pp8.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 27 March 2010, Supply chain management: A semiotic approach, National Conference on TLC, pp82.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 12-13 Feb 2010, Approach to lean & green supply chain system: A case study, BIT National Management Conclave 2010,pp29.

  • Raof Ahmad Khan, Rajeev Kumar, Somnath Chattopadhyaya, Sanjeev Kumar, B.P Agrawal Influence of Magnetic Field on Bead Geometry of Gas Tungsten Arc Welded stainless steel plate. ‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.

  • Mohd. Rashid, Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, Optimizations of process parameters for tensile strength and micro-hardness of friction stir welded AA6082 specimen using Response surface methodology (RSM)  ‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, A.Pramanik, Sanjeev Kumar, A.K.Basak  Tribological behaviour of chromium nitride coating ‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.

  • Ramesh Chandra Yadaw, Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, R.C.Singh  Comparative study of surface coating for automotive applications-A Review ‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.

  • Payal Sharma, Ujjwal Chauhan, Sanjeev Kumar, Kamal Sharma A Review on Dynamic Rheology for polymers-‘International Conference on Recent Trends and Innovations in Mechanical Engineering’. ICRTIME-2018 July 20-21.

  • Rajeev Kumar, Somnath Chattopadhyaya,Sanjeev Kumar, B.P.AgarwalGas tungsten arc Welding (GTAW) Welding-A review 3 rd International conference on Advancement and recent innovations in Mechanical, production and industrial Engineering.ISBN-978-93-85537-06-6

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, AlokeshPramanik  Tribological behavior of surface coating by PVD-A Review. International conference on “Evolutions in manufacturing: Technologies and Business Strategies for Global competiveness”.ICEM-2016 November 12-13-2016

  • Shailesh Singh, Somnath Chattopadhyaya, Sanjeev Kumar and AlokeshPramanik “Application of Fuzzy Logic Model for study the wear behavior of Chrome Coating by physical vapour deposition (PVD)”International Conference on Advances in Computing and Data Sciences (ICACDS-2016) at Nov.11-12 2016. [Paper will be published in SCOPUS indexed Journal]

  • Rajeev Kumar, Somnath Chattopadhyaya,Sanjeev KumarPrediction of bead reinforcement height and width of Gas Tungsten Arc Welded bead-on plate joints using Artificial Neural Network5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th, 2014, IITGuwahati, Assam, India.

  • Rajeev Kumar, Somnath Chattopadhyaya, Sanjeev Kumar, 2014, Critical analysis of infrared images in tungsten inert gas welding of stainless steel plate, International conference on advances in manufacturing and materials engineering, NIT, Surathkal.

  • Rajeev Kumar, Somnath Chattopadhyaya, Sanjeev Kumar, 2013, Green Supply Chain System: A Case Study from Indian Industries, 5th International Scientific and Expert Conference TEAM 2013, Presov, 4th to 6th November 2013.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2012, Practice and Implementation of Green Supply Chain Management: A Case Study from Indian Rubber/Plastic Industry, 4th International & 25th All India Manufacturing Technology, Design and Research Conference.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2012, Practice and Implementation of Green Supply Chain Management: A Case Study from Indian Rubber/Plastic Industry, 4th International & 25th All India Manufacturing Technology, Design and Research Conference.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, Sergej Hloch, 2012, Green Supply Chain Management: A Case Study from Indian Small and Medium Scale Industry, 2ndInternational Conference Manufacturing Engineering & Management, pp. 27-32, ISBN 978-80-553-1216-3.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 27-29 March 2012, Sustainable Supply Chain Management: A Case Study from Indian Automotive Industry, 3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), Xiamen, China.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 21st to 26th June 2011, Green supply chain system, its element and utility in Indian industry, Journal of Engineering and Technology Conference 2011, Harmony Apeiron, C.A., Poprad,Slovak Republic,pp53-62, ISBN 978?80?89347?07?0.

  • Vinay Sharma, Sanjeev Kumar, Somnath chattopadhyaya,2011, Environmental Management and Manufacturing Performance: An Assessment of Supply Chain Management Practices in the Manufacturing Industries, International Conference of Agile Manufacturing Systems,pp 558-568 [ ISSN 978-81-8487-200-2].

  • Vinay Sharma, Sanjeev Kumar, Somnathchattopadhyaya, 2011, A comparative analysis of internal environmental management performance between Indian small and medium sized enterprises for implementation of sustainable supply chain, International Conference of Agile Manufacturing Systems, pp247-258 [ISSN 978-81-8487-200-2].

  • Sanjeev Kumar, Somnath Chattopadhyaya, 14-15 January 2011,Sustainable logistics in small & medium enterprises, International Conference on Challenges of Globalization & Strategy for Competitiveness,pp163-170[ISBN 10:0230-33232-3,ISBN 13:978-0230-33232-4]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 6-7 January 2011, How the supply chain can be made green, 2nd International Conference on Green Business Strategy, pp 388-393. ISBN.978-81-909-387-1-6

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 8 May 2010, Sustainable supply chain management: An introduction, 2nd International Conference on Innovative practices in Management & Information Technology for Excellence, pp40.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 25-26 Nov. 2010, Environmental management for small sized Indian enterprises in manufacturing,1st International Scientific Conference on Manufacturing Engineering and Management, Presov,Slovak Republic, pp103-106 [ISBN 978-83-61118-30-5].

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2010, Moving towards green supply chain: Indian industry, International Conference on Mechanical and Industrial Engineering, 25-27 Aug 2010, World Academy of Science Engineering and Technology, Singapore, Year 6, Issue 69, August 2010, pp178-180.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 25-28 Sep 2010, Implementation of green supply chain through green manufacturing, International Conference & Colloquium on Excellence in Research & Education, pp1-9.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2-3 January 2010, Approach of green supply chain management for Indian enterprises, 5th SIMSR-ASIA 2010 International Marketing Conference, pp32.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 8-9 April 2010, Logistic supply chain management: A case study from the Indian rubber industry, International Conference on Recent Advances in Mechanical Engineering, pp165-168. [ISBN 978-81-907917-3-1]

  • Payal Sharma, Ujjwal Chauhan, Dr. Sanjeev Kumar and Dr. Kamal Sharma, A Review on Dynamic Rheology for Polymers. International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6 (2018) pp. 363-368.

  • Mohd. Rashid, Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar ,Optimization of process parameters for tensile strength and micro hardness of friction stir welded AA6082 specimen using Response surface methodology (RSM). International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6 (2018) pp. 166-170.

  • Rajeev Kumar, Somnath Chattopadhyaya, Raof Ahmad Khan, Sanjeev Kumar, B.P.Agarwal, Influence of Magnetic Field on Bead Geometry of Gas Tungsten Arc Welded Stainless Steel Plate International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6 (2018) pp. 154-159.

  • Ramesh Chandra Yadaw , Shailesh Kumar Singh ,SomanthChattopadhyaya ,Sanjeev Kumar , R.C. Singh Comparative study of surface coating for automotive application-A review. International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6 (2018) pp. 17-22.

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, A. Pramanik, Sanjeev Kumar, A. K. Basak, Tribological behaviour of chromium nitride coating. International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 6 (2018) pp. 23-25

  • Ramesh Chandra Yadaw, Shailesh Kumar Singh, Somanth Chattopadhyaya, Sanjeev Kumar, R.C. Singh, Tribological behavior of thin film coating-a review.  International Journal of Engineering & Technology, 7 (3) (2018) 1656-1663

  • Shailesh kumarsingh, Somnath Chattopadhyaya, AlokeshPramanik, Sanjeev Kumar, A.K. Basak, Effect of lubrication on the wear behavior of CrN Coating deposited by PVD process.  International Journal of Surface Science and Engineering. ISSN online 1749-7868

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, AlokeshPramanik and Sanjeev Kumar Influence of Nano-particle on the Wear behaviour of Thin Film Coatings-A Review.International Journal of Applied Engineering Research.pp. 4053-4058,ISSN 0973-4562.

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, Sanjeev Kumar, AlokeshPramanik,Application of fuzzy logic model for study the wear behaviour of chrome coating by physical vapour deposition (PVD). International journal of Hybrid information Technology. pp; 41-48. ISSN 1738-9968

  • Shailesh Kumar Singh, Somnath Chattopadhyaya, AlokeshPramanik and Sanjeev Kumar Wear behavior of chromium nitride coating in dry condition at lower sliding velocity and load.The International Journal of Advanced Manufacturing Technology.pp 1665–1675, ISSN: 0268-3768.

  • Shailesh Kumar Singh, Rasik Mohan Tiwari, Anil kumar, Satyajeet Kumar,Qasim Murtaza, Sanjeev Kumar “Mechanical Properties and Microstructure of Al-5083 by TIG Welding” published in Elsevier Materials Today: Proceedings, ISSN: 2214-7853.

  • Archana Pandey , P S Satvat ,Solid Waste Treatment Vermiculture: A Sustainable System”, July 29 – 31, 2010, International Conference on Environment pollution in Bangalore.

  • Archana Pandey,  Nidhi “Impact of Industrialization on the environment : A solution in Indian Scenario” , 14 Nov 2011 in NCEPRM -11.

  • Archana Pandey ,Nidhi “Urban Development – An impact on environment and an effective solution” , 15 Nov 2011 in NCEEPRM.

  • Archana Pandey , Arti Pitle“ An Overview of Biodiesel as Next Generation Alternate Fuel for CI Diesel Engines” PEEE 2013,26 - 27 Aug 2013 , Singapore.

  • Archana Pandey , Current Energy scenario : A review in context to India”   PEEE 2013,   26 -27 Aug 2013 , Singapore .

  • A paper on “ E Vermi Synthesis – A new Trend in renewable energy ‘’: In International  Advanced Research Journal in Science and Engineering and Technology (IARJSRT).

  • Vaishnavi Tuljapurkar, Dr. Arun Dhawale, “Cost controlling and Scheduling using earned Value Analysis”,  August 2015, IJTRA

  • Ashish kush ,Properties of polymer modified ferrocement in mortar in IJJRA (ISSN:2349-7688)  pubished on Dec 2014.

  • Ashish Kush ,Partial replacement of concrete with spherical plastic balls and reducing dead weight presented in IJSDR published on june 2017.

  • Anant Kumar Gupta, H. K. Gupta and S. Awasthi, 2017 “Enhancement in stabilization properties of soil using waste polypropylene Plastic fiber” in International Journal of Engineering Technology Science and Research.

  • Anant Kumar Gupta, H. K. Gupta and M. C. Maurya, 2017 “Shear strength enhancement of soil by using Coconut Fiber” in Imperial Journal of Interdisciplinary Research.

  • K..C Sethi, Sangita and Suraj, 2016” Experimental Investigation on Effect of Silica Fume of compressive and Tensile Strength of concrete”. International Interdisciplinary Conference on Engineering Science and Management, Goa.

  • K. C Sethi, Sangita, Devesh and Dillip, 2016” Investigation on the causes of failure in flexible pavement”. International Interdisciplinary Conference on Engineering Science and Management, Goa.

  • C Sethi, Devesh, Neha and A K Sagar, 2016” A review on existing Indian Pavement maintenance management system”. International InterdisciplinaryConference on Engineering Science and Management, Goa.

  • A.K Mohanta,C .R Sahoo ,K.C Sahoo and K.C Sethi, 2017” Review of literature “Perceptive of solid waste and their sustainable management in urban vicinity.

  • Rikshit Kumar, A. K. Anand , 2016 “Behaviour  of reinforced concrete beams with coconut shell as coarse aggregates” in IJETSR.

  • Harivansh kumar Chaudhary, Srivastava P.K., 2017 “ A review paper utilization of Zycosoil as an anti-stripping agent in bituminous mix” at national conference on recent advance in mechanical engineering organized by NIT Kurukshetra.

  • Harivansh kumar Chaudhary, Srivastava P.K., 2017 “Application of Zycosoil in bituminous mix “ at 7th internation conference on recent development in engineering science, humanities and management held at NITTTR Chandigarh, India  (MHRD, Govt. of India).

  • Harivansh kumar Chaudhary, Srivastava P.K., 2017 “Application of zycosoil in bituminous mix “ published in international journal of advanced technology and science ( ISNN 2348-7550)

  • Srivastava A.K., Nag A, Dixit A.R, Scucka. J, Hloch. S, Klichova. D, Hlavacek. P, Tiwari S., Hardness measurement of surfaces on hybrid metal matrix composite created by turning using an abrasive water jet and WED, Measurement Volume 131, January 2019, pp.628-639, ISSN : 0263-2241.

  • Srivastava AK, Nag A, Dixit AR, Hloch S, Tiwari S.,Scucka J, Surface integrity in wire-EDM tangential turning of in-situ hybrid metal matrix composite A359/B4C/Al2O3, Science and Engineering of Composite Materials, March –April 2018[SCI indexed], Impact Factor .0619, pp. 122-133, Volume 26, Issue 1.

  • Srivastava AK, Nag A, Dixit AR, Hloch S, Tiwari S.,Scucka J, Surface integrity in wire-EDM tangential turning of in-situ hybrid metal matrix composite A359/B4C/Al2O3, Science and Engineering of Composite Materials, March –April 2018[SCI indexed], Impact Factor .0619, pp. 122-133, Volume 26, Issue 1.

  • Srivastava AK, Nag A, Dixit AR, Tiwari S.,Scucka J, Zelenak M, Hloch S, Hlavacek P, Surface integrity in tangential turning of hybrid MMC A359/B4C/Al2O3 by abrasive waterjet, Journal of Manufacturing Processes, August 2017, Volume 28 pp.11–20. [SCI]

  • Srivastava AK, Dixit AR, Tiwari  S., Investigation of microstructural and mechanical properties of metal matrix composite A359/B4C through electromagnetic stir casting, Indian journal of engineering & materials sciences, 2016 (April & June) Volume 23 (2&3), pp.171-180, ISSN 0975-1017 (online). [SCI].

  • Srivastava A.K., Dixit A.R., Tiwari S., A review on intensification of metal matrix composite and its non-conventional machining, Science and Engineering of Composite Materials, Volume 25, Issue 2, pp.213-228, May 2016, Impact factor 0.619, DOI 10.1515/secm-2015-0287. [SCI]

  • Srivastava. A, Dixit. A.R., Tiwari S., Experimental Investigation of Wire EDM Process Parameters on Aluminum Metal Matrix Composite Al2024/SiC, International Journal of Advance Research and Innovation, Volume 2 issue 2 (2014) ISSN 2347-3258, pp. 511-515. [Non paid peer reviewed].

  • Srivastava. A, Dixit. A.R., Tiwari. S, A Review on Fabrication and Characterization of Aluminum Metal Matrix Composite (AMMC), International Journal of Advance Research and Innovation, Volume 2 (2014),pp. 516-521.

  • Rajeev Kumar, Anmol Bhatia, Somnath Chattopadhyaya, Sanjeev Kumar, G.K. Singh, 2014, Multi Objective Optimization of Wire Electric Discharge Machining of EN 31 Tool Steel using orthogonal array with principal component analysis, International Journal of Current Engineering & Technology, E-ISSIN 2277-4106 : P-ISSN 2347-5161.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2013, Developing green supply chain system for Indian enterprises, International Journal of Business Excellence, ISSN 1756-0047.

  • Vinay Sharma, Sanjeev Kumar, Somnath Chattopadhyaya, A comparative analysis of internal environmental management performance between Indian small and medium sized enterprises for implementation of sustainable supply chain, International Journal of Advanced Manufacturing System, ISSN 1536-2639.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, Sustainable Supply Chain Management: A Case Study From Indian Automotive Industry, Advance Materials Research, Vols. 472-475 (2012) pp 3359-3370, ISSN 1022-6680.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, Green Supply Chain Management: A Case Study from Indian Electrical and Electronics Industry, International Journal of Soft computing and Engineering, Volume-1, Issue-6, January 2012, pp 275-281, ISSN: 2231-2307.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2012, Sustainable supply chain: Vendor and Customer participation, International Journal of Modelling in Operations Management ,Vol. 2, No. 4, 2012, pp 360-377, ISSN 2042-4094.

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2011, Green supply chain system, its element and utility in Indian industry,Internet Journal of Engineering and Technology.Volume: II, Number 1,Issue1, pp 3-10, ISSN 1338?2357.

  • Sanjeev Kumar Somnath Chattopadhyaya, Vinay Sharma , 2011,Green supply chain and operations practice and performance of small scale rubber product manufacturing unit, International Journal of Engineering Technologies in Sciences and Engineering .Vol.4,No.2,ISSN 1923-9181

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma , 2011,Performance of eco-procurement practices and green supply chain performance of SMEs in Delhi,B Shastra-International Journal of Management,Vol-II,Issue-I,pp43-46.[ISSN:2229-2010]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma ,2011, Performance of sustainable logistic practices of SMEs in Delhi, International Journal of Research in Computer Application and Management, Vol.No 1,Issue No.3, pp85-89.[ISSN 2231-1009]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma,2011,Environmental management for small sized Indian enterprises in manufacturing, Journal of Manufacturing Engineering,No.2, Volume X,pp54-56.[ISSN 1335-7972]

  • Gopal Verma, Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2010, Energy management in small & medium Indian enterprises: An approach, ISST Journal of Electrical & Electronics Engineering, Vol.1, No.1, pp11-15. [ISSN: 0976-7363]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Anurag Mishra, 2010,Inflicting Agility through just in time practices in a truck tyre manufacturing plant, International Journal of Mechanical Engineering, Vol.3, Issue2,pp199-203.[ISSN:0974-5823]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Anurag Mishra, 2010,Critical analysis of the stock in process of a conveyor belt manufacturing unit through computer simulation, International Journal of Mechanical Engineering, Vol.3, Issue2,pp141-150.[ISSN:0974-5823].

  • Sanjeev Kumar, Gopal Verma, Somnath Chattopadhyaya, Vinay Sharma,2010, Integrating forward & reverse supply chain, ISST Journal of Mechanical Engineering, Vol.1, No.1,pp73-75.[ISSN: 0976-7371]

  • Sanjeev Kumar, Gopal Verma, Somnath Chattopadhyaya, Vinay Sharma,2010, Green manufacturing: “green” value chain practices for the Indian enterprises, ISST Journal of Mechanical Engineering, Vol.1, No.1,pp43-45.[ISSN: 0976-7371]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, 2010, Role of environmental conscious design & manufacturing for implementation of green supply chain, International Journal of Management Research and Technology, Vol.4, No.2, pp533-539.[ISSN:0974-3502]

  • Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma,2010, Approaching green supply chain management through reusing & recyclable packaging method, International Journal of Retailing and Management, special issue October 2010, pp98-102.[ISSN:0976-318X]

  • Gagan Thakral “Using Latent Semantic Analysis in mapping of patent and scientific documents” Paper published & presented in National Conference on Emerging Trends in Engineering and Technology ([ET]2 -2014), May 03, 2014, Apeejay Satya University, Sohna, India.

  • Gagan Thakral "AES with Better Performance" Paper published & presented in National Conference on Emerging Trends in Engineering and Technology ([ET]2 -2014), May 03, 2014, Apeejay Satya University, Sohna, India.

  • Vikas Pardesi and Aayush Agarwal “A Secure Avenue to Satellite Image Encryption and Authentication with ECC and Voice Components (MFCC, Pitch)” published in the proceedings of 2nd international conference “Wilkes 2013”  at Lovely Professional University, Punjab, India.

  • Aayush Agarwal and Vikas Pardesi “A Secure Infrastructure for Data Confidentiality in Clinic Data Accessing Based on Data Resource Model” published in the proceedings of 4th international conference “Confluence 2013”  at Amity University, Uttar Pradesh, India.

  • Vikas Chaudhary, Kanika Garg, Arun Kr. Sharma, "Fuzzy C-Mean Algorithm using different variants" presented and published in proceeding of "National Conference on Innovation and Entrepreneurship in Information and Communication Technology" by CSI Ghaziabad Chapter and MTU, Noida on 14-15 May 2011.

  • Vikas Chaudhary, Kanika Garg, Balbir Singh, "A Comparative Study to Solve Job Shop Scheduling Problem Using Genetic Algorithms and Neural Network " presented and published in proceeding of "National Conference on Innovation and Entrepreneurship in Information and Communication Technology" by CSI Ghaziabad Chapter and MTU, Noida on 14-15 May 2011.

  • Bharat Bhardwaj, Manoj Diwakar, Tejeswi Chauhan, Pankaj Negi, Dheeraj Negi and Prabhishek Singh, “An Enhanced MoBayesShrink Thresholding for Medical Image Denoising” published in “4th IEEE International Conference on Internet of Things: Smart Innovation and Usage(IOT-SIU 2019)".

  • Gagan Thakral “Advance Encryption Standard Implementation” Paper published in International Journal of Engineering and Computer Science in Volume 3 Issue 6 June 2014.

  • Gagan Thakral “Implemenation of cause and effect graph using Placement System” in International Journal of Recent Trends in Engineering and Research, Volume 3, Issue 5; May - 2017.

  • Gagan Thakral “Fault Model For Cause Effect Graph Testing” in International Journal of Recent Trends in Engineering and Research, Volume 3, Issue 5; May - 2017.

  • Prabhishek Singh, Aayush Agarwal and Jyoti Gupta “Image Watermark Attacks: Classification & Implementation” published in volume 4 issue 2 of International Journal on Electronics & Communication Technology (IJECT).

  • Aayush Agarwal and Rekha Saraswat “A Survey on Group Signature, its Applications and their Attacks” published in volume 2 issue 10 of International Journal of Engineering and Innovative Technology (IJEIT).

  • Aayush Agarwal, Vikas Pardesi and Namita Agarwal “A New Approach to Sorting: Min- Max Sorting Algorithm” will be published in volume 2 issue 5 of International Journal of Engineering Research and Technology (IJERT).

  • Aayush Agarwal and Rekha Saraswat “Modified Group Signature in Online Auction System” published in volume 2 issue 4 of International Journal of Engineering and Advanced Technology (IJEAT), page no 310-313.

  • Sandeep Kumar,Kanika Garg, Vikas Mishra,”An Improved Gullio Quistare Identification Scheme based on ECC” Journal of Computing, pp. Vol. 3, Issue 8,  Aug 2011.

  • Kanika Garg, Dr. R. Radhakrishnan, Vikas Chaudhary, "A modified Zero-knowledge Scheme using ECC" Journal of Computing, pp. 102-105, vol. 3, Issue 5, May 2011 (IF: 0.21).

  • Kanika Garg, ,Pratibha Singh”Elliptic Curve Cryptography based Three Pass Cryptosystem”. IJCSI

  • Sharmila, A N Mishra and Neeta Awasthy, “Audio Visual Hindi Speech Recognition Using HMM ”, International Journal of Information and Communication Technology- Inderscience, 2015

  • Neha Raheja, Poonam Goyal and Svetlana Singh, “Spectrum Handoff schemes and Optimum Utilization of Spectrum Holes in Cognitive Radio Network”, International Organization of Scientific Research, Vol.11, Issue-6, ver.3 Nov.-Dec.2016.

  • Arpita Gupta, ‘Renal Failure Detection Using Data Mining’, International Journal of Research in Advent Technology (IJRAT) E-ISSN: 2321-9637 pp 45-49, 2018

  • Arpita Gupta, ‘Design and Simulation of Clipper circuits using Multisim Software’, proceedings of international conference ‘Momentun-2018’ in SPCOE, Otur, Pune, feb 2018

  • Arpita Gupta, A Novel Method of Advertisement using GPS, National Conference MOMENTUM-17, Pune, February 2017.

  • Arpita Gupta, “Design of Smart Solar Inverter System”, International conference, ICoSIP-2017, MIT Aurangabad, March 2017

  • Arpita Gupta, “Head and Voice Based Wheelchair For Physically Disabled” , international conference on development in management, technology and business held in ITS college Ghaziabad, March 2016.

  • Manu Chaudhary, A. N. Mishra, Ramendra Singh, “High Gain Slot Antenna for Ism and Wireless Applications”, International Journal of Computer Applications, No. 1, Aug 2018.

  • Deepak Gupta, V. K. Gupta, A. N. Mishra, “Adaptive Noise Cancellation using Transform Domain Adaptive Algorithms”, International Journal of Computer Applications, Aug 2018, No.1, ISBN- 973-93-80975-49-5.

  • Deepak Gupta, V. K. Gupta, A. N. Mishra, “Pseudo Affine Projection Algorithm Based Noise Minimization from Speech Signals”, International Journal of Computer Applications, No.1, Aug 2018.

  • “Study of Potential Energy Term in VMINS Model” Pallavi Bhatt, Hardik P. Trivedi, Lalit K. Gupta, Anil Kumar, Than Singh Saini, Krishna Chandra, Jai Prakash Gupta “Proc. DAE-BRNS of Int. Symposium on Nuclear Physics, University of Delhi, New Delhi” Vol. 57 (2012) 234. (Co-Author)

  • “Analysis of Basic Cross-Section and Blackness Parameter for Proton-Nucleus Interactions” V. Sharma , Anil Kumar, S.V. Singh, Y. Kumar, L.K. Gupta, J.P. Gupta, M. Giri “Int. Proc. DAE-BRNS Symposium on Nuclear Physics, Bhabha Atomic Research Centre, Mumbai” Vol. 50 (2005) 410. (Co-Author)

  • “An Analysis of the Basic Absorption Cross-Section in the Proton Absorption by Target Nucleus” V. Sharma, L.K. Gupta, Y. Kumar, Anil Kumar, S.V. Singh, J.P. Gupta, M. Giri “Proc. DAE-BRNS Symposium on Nuclear Physics, Banaras Hindu University, Varanasi” Vol. 47B (2004) 438. (Co-Author)

  • “Difference in Total Cross-Section of Proton-Proton and Proton-Antiproton Interactions” Y. Kumar, V. Sharma, Anil Kumar, S.V. Singh, L.K. Gupta, J.P. Gupta M. Giri “Proc. DAE-BRNS Symposium on Nuclear Physics, Banaras Hindu University, Varanasi” Vol. 47B (2004) 410. (Co-Author)

  • “Parameterization of Charged Multiplicity in Proton-Antiproton and Antiproton-Nucleus Collisions” Anil Kumar, S.V. Singh, Y. Kumar, V. Sharma, L.K. Gupta J.P. Gupta, M. Giri “Proc. DAE-BRNS Symposium on Nuclear Physics, Banaras Hindu University, Varanasi” Vol. 47B (2004) 412.

  • “Relating Observables in QCD without Renormalisation Scale or Scheme Ambiguity” S.V. Singh, Anil Kumar, Y. Kumar, L.K. Gupta, J.P. Gupta, M. Giri “Proc. DAE-BRNS Symposium on Nuclear Physics, Banaras Hindu University, Varanasi” Vol. 47B (2004) 408. (Co-Author)

  • Organizing committee member for Seminar on “Nanotechnology: Opportunities and Challenges” 6th – 7th July 2018 at Krishna Engineering College, Mohan Nagar sponsored by AKTU, Lucknow.

  • Two day Faculty Development Programme on Basic Simulation and Mathemetical Modelling Jan,2014.

  • Attended a National Seminar on Electronics- An indispensable tool for smart product innovations , B.B.D.I.T. Ghaziabad, April 2007 .

  • Prented a Paer” Application of graph labeling in communication network”.in the International conference IMST 2009-FIMXVIII at Jaypee University of Information Technology, Waknaghat, Solan held during August 2-4, 2009

  • Attended workshop titled “ Learner Centered Approach to Teaching “ conducted by BITS,Pilani on 15th April 2017

  • Presented a paper in International conference on “Modern Mathematical Methods and High Performance Computing in Science &Technology”- (M3HPCST-2015) at RKGIT, Ghaziabad, (27-29, Dec 2015) on “Reliability Measures for Tele–Communications System with redundant transferring machines by using Algebraic Methods.

  • Attended Faculty Development Programme on ‘Modelling, Simulation & MATLAB Tools’ at ABES Engineering College, Ghaziabad, Jan 14-17, 2014.

  • Attended two week faculty development program on “ENTERPRENEURSHIP” sponsored by NSTEDB at Krishna Engineering College, 17th Dec to 29th Dec 2018

  • Ganesh Kr. Thakur,Bandana Priya “Time detraction of Sign Image Segmentation based on Fuzzy Graph“Napier Indian Advanced Journal of Science , ISSN 0975-1726, Vol 2 , 2009

  • Ganesh Kr. Thakur,Bandana Priya “ISL Image representation using Fuzzy Graph “Napier Indian Advanced Journal of Science , ISSN 0975-1726, Vol 2 , 2009

  • Thakur G.K, Priya B “Second-Order Duality for non differential multiobjective programming involving univexity. “Journal of Mathematics Research, Canada ISSN 1916-9795 E-ISSN 1916-9809, Vol. 2, No. 4, Nov. 2010.

  • Priya B Ganesh Kr. Thakur, Bandana Priya, “Higher -Order Duality for non differential multiobjective programming involving (, ?)-univexity ,Kathmandu University of Science,Engineering & technology, Vol. 7, No. I, Sept 2011, pp 92-104

  • Ganesh Kr. Thakur, Bandana Priya,Pawan Kumar Sharma,– Ability Assessment of A Solar PV System Integrated With Greenhouse - International Journal of Engineering Research and Technology, ISSN: 2278-0181, Jan 2014, Vol. 3, Issue 1

  • Ganesh Kr. Thakur,Bandana Priya , Pawan Kumar Sharma – Reliability Assessment for rolling mills using Algebra of logics. - International Journal of Advanced Computer Technology , ISSN: 2319-7900, Dec 2015, Vol. 4, No 6 , (Pages 45-51)

  • Ganesh Kr. Thakur,Bandana Priya , Pawan Kumar Sharma-Reliability Measures for T ele-Communication System with Redundant Transferring Machine by Using Algebraic Method, American Journal of Operations Research, 2016, 6, 371-377 ISSN Online: 2160-8849 ISSN Print: 2160-8830.

  • Ganesh Kr. Thakur,Mamta Bhardwaj , Pawan Kumar Sharma”Conventional to ICT Based Teaching: Paradigm and Attitude Shift in Engineering Students” Global Jourrnal for Research Analysis Volume :6 | Issue : 5 | may 2017 • ISSN No 2277 – 8160

  • Thakur G.K, Priya B,Sharma Pawan “ Reliability Estimation of a Hybrid Geothermal Conventional Power Plant by using Algebra of Logics “International Journal Of Applied Engineering Research ISSN Number : 0973-4562,Vol: 13, Number 20(2018)pp. 14566-14572

  • Thakur G.K, Priya B,Sudesh Garg “Unravelling Non-differentiable Manifold Problems based on Lagrange Duality and Wolfe Duality “International Journal Of Applied Engineering Research ISSN Number : 0973-4562,Vol: 13, Number 6 (2018)pp. 3441-3448

  • Thakur G.K, Priya B “An Efficient Coloring Algorithm for Time Detraction of Sign Image Segmentation based on Fuzzy Graph “Journal of Applied Security Research ISSN 1936-1610,1936-1629, Vol. 14, April 2019, Publisher : Taylor & Francis (Accepted)

  • Thakur G.K, Priya B “A Novel Fuzzy Graph Theory Based Approach for Image Representation and Segmentation via Graph Coloring “Journal of Applied Security Research ISSN 1936-1610,1936-1629, Vol. 14,Feb 2019, Publisher : Taylor & Francis (Accepted)

  • Thakur G.K, Priya B, “A Novel Computation For Predicting Time series using Fuzzy Logical Distance Connectivity Function and Visibility Graph Theory“ACM Transactions on Computational Logic. ISSN:1529-3785 EISSN:1557-945X (Communicated)

  • Organizing committee member for Seminar on “Nanotechnology: Opportunities and Challenges” 6th – 7th July 2018 at Krishna Engineering College, Mohan Nagar sponsored by AKTU, Lucknow.

  • Attended workshop on RECENT TRENDS IN MATHEMATICAL MODELLING AND SCIENTIFIC COMPUTING, RTMMSC-2017 to be held at Jaypee Institute of Information Technology, Sector-128, Noida on 7th - 8th April, 2017

  • Participated in the Engineering & Sciences Innovative Summit conducted by National Instruments in 2015.

  • Attended a workshop on “Modeling and Simulation of refinery processes organized by UPTU in 2014.

  • Attended a workshop on Design Research method at MTU, Noida in 2013

  • Attended one week QIP in IIT ROORKEE on“ VISHION, GRAPHICS and IMAGE PROCESSING” in 2007

  • Coefficient of entire function represented by Dirchilet series. The Alig. Bull. Math in 2007.

  • Growth of geometric mean of an entire function, pulb.math.Debr. 161-169 in 2008.

  • A novel Method of Advertisement using GPS, International Journal of Research in Advent Technology(IJRAT) in National conference “Momemtum-17,held on14th &15 Feb (2017).

  • Integrability of Trigonometric series with coefficient satisfying certain conditions, in International journal for Research in Applied Science & Engineering Technology volume5, issue I, 2017.paper id-IJRASET6102(Impact factor 5.969)pp-288-293 UGC Approved.

  • On the coefficient of entire functions of generalized order, Global Journal of Pure and Applied Mathematics (GJPAM)(Scopus indexed and UGC Approved) . volume 13, no 6 (2017) pp-2527-2532

  • Renal Failure Detection Using Data Mining International Journal of Research in Advent Technology “Momemtum-18 March 2018(Impact factor 5.153)

  • Presented a research paper in eighth conference of International Academy of Physical Sciences, organized by C.C.S.Univ. Meerut Dec. 29-31, 2005. Presented a research paper entitled “Mathematical Modelling of Blood Flow Through Vertebral Artery with Stenosis” in National Conference on Biomechanics, I.I.T. Roorkee, March 07-08, 2009. 

  • Presented a research paper in International conference on Industrial and Applied Mathematics, organized by Jamia Millia Islamia, New Delhi on Dec. 04-06, 2004.

  • Presented a research paper in 19th annual conference of Ramanujan Mathematical Society, hosted by Institute of Basic Sciences, Agra on July 21-24, 2004.

  • Presented paper entitled “Analysis of Stress Intensity Factor for an Epitrochoidal Disc under Two Concentrated Forces” in National Seminar on History of Mathematical Sciences and Applicable Mathematics, Gurukul Kangri Vishwavidyalaya, Hardwar, March 07-09, 2003.

  • Presented paper entitled “An Isotropic elastic Plate in the form of Epitrochoidal Disc Under Concentrated Forces” in Fifth Conference of the International Academy of Physical Sciences, Bundelkhand University, Jhansi, April 07-09, 2002.

  • Presented paper entitled “Stress Distribution in a thin isotropic infinite elastic plate an Epitrochoidal hole under uniform pressure” in International Conference on Mathematics Modeling, University of Roorkee, Roorkee, 29-31 Jan., 2001.

  • Participated in U.G.C. Zonal Workshop for Northern Region on Industrial Mathematics held at Hamdard University, New Delhi from Feb. 23-27, 1999.

  • Rashid Ali, “An Identify based Multi-receiver generalized signcryption scheme”, Asian Journal of Applied Sciences, (ISSN:2321-0893), Volume-06, Issue-04, August 2018.

  • Rashid Ali “ A case of maintenance service centre using simulation modelling approach”, journal of service research, volume, 2017.

  • Rashid Ali, “Green Supply Chain Inventory Model for Deteriorating items with Variable Demand under Inflation”, international Journal Business Forecasting and marketing intelligence, volume-3, No-1, 2017.

  • Rashid Ali, Prachi Jain, A case study of take away restaurant using simulation modeling approach, Journal of Service science Research, volume-8, Issue-2, PP 207-221December 2016.

  • Rashid Ali, Tej Singh, Musharraf Ali, An Efficient Identity based Multi-Proxy Multi-Signcryption Scheme from Bilinear Pairings, International Journal of Computer application (0972-8887), Volume 151, No.-6 October 2016.

  • Rashid Ali, “Public Verifiable identity based multi proxy multi-signcryption scheme from bilinear pairings.” “International journal of computer application (ISSN No-0975-8887), Vol-137 No.-10, 2016.

  • Rashid Ali, Mathematical Study of Blood Flow in an Elastic Tube with Wall Deformation,“Far East Journal of Applied Mathematics, Allahabad, India”  ISSN:0972-0960, May 11, 2015.

  • Rashid Ali, An ID Based Threshold Signcryption Scheme with Threshold Unsigncryption, “International Journal of Advanced Research in Computer Science and Software Engineering” ISSN : 2277 128X, Vol. 5, Issue 6, June 2015.

  • Rashid Ali, Mathematical Modeling of Unsteady Flow Through A Tube with Time Dependent Stenosis in Hemodynamics, Advances in Applied Mathematical Biosciences, Volume-5, Issue-2, Page No.-103-113, 2014, ISSN : 2248-9983.

  • Rashid Ali, V. K. Singh & A. K. Singh, “ An Infinite Plate Weakened By A Circular Hole”, International Journal of Engineering Science Invention, Vol.-2, Issue-2, pp. 32-39, 2013.

  • Rashid Ali, Wavelet Optimized Adaptive Mesh for MHD Flow Problems, Applied Mathematics (Scientific Research), Volume-3, Page No.-127-134, 2012.

  • Rashid Ali, Monika Gupta, M. P. Singh & V. K. Katiyar, “Analytical Study for the Flow of Blood Cell in Capillaries with Stenosis”, International Journal of Mathematics, Shekhar (New Series), Vol. III, Issue I, pp. 11-20, 2011.

  • Rashid Ali, V. K. Singh & A. K. Singh, “Conical Punch Problem for Initially Stressed Neo-Hookean Solids”, International Journal of Computing & Mathematical Applications, Vol.4, No.2, pp. 117-127, 2010.

  • Rashid Ali,V. K. Singh & A. K. Singh, “A Crack Problem for Initially Stressed Neo-Hookean Solids” ,International Journal of Computational Science and Mathematics, Volume 2, No. 1 (2010), pp.237-245, International Research Publication House.

  • Rashid Ali, Ramindar Kaur, V. K. Katiyar & M. P. Singh, “Mathematical Modeling for the Flow of Blood Cells in Capillaries”, Advances in Applied Mathematical Biosciences, Volume 1, No. 1(2010), pp. 19-28, International Research Publication House.

  • Rashid Ali, Ramindar Kaur, V. K. Katiyar & M. P. Singh, “Mathematical Modelling of Blood Flow Through Vertebral Artery with Stenoses”, Indian Journal of Biomechanics; Special Issue (NCBM 7-8 March 2009) India.

  • Rashid Ali & Anuj Bhardwaj, “Image Compression Using Modified Fast Haar Wavelet Transform”, Word Applied Sciences Journal 7(5): 647-653, 2009. IDOSI Publiacations, 2009. Rashid Ali, Anuj Bhardwaj & Bani Singh,”Wavelet Optimized Adaptive Mesh for MHD Flow Problem”, Applied Mathematics, Scientific Research Inc.,Vol.3, No.2, pp. 127-134, 2012, USA.

  • Rashid Ali, Anuj Bhardwaj & Bani Singh, “A Composite Technique to Solve Fredholm Integral Equation of Second Kind”, Journal of Wavelet Theory and Application,Vol.4,No.1,pp 9-19,2010.Delhi.

  • Rashid Ali, Anuj Bhardwaj & Bani Singh, “A Wavelet Method for Solving Singular Integral Equation of MHD”, Applied Mathematics & Computation, 214 (2009) 271.279 Elsevier Science,  Netherland.

  • Rashid Ali, M. P. Singh & Parul Rani, “Analysis of Stress Intensity Factor for an Epitrochoidal Disc Under Two Concentric Forces, Bulletin of Pure and Applied Science, 20E (2) (2004), p: 239-246 Delhi, India.

  • Rashid Ali, M. P. Singh & Parul Rani, “Stresses in a Thin Isotropic Elastic Infinite Plate with an Epitrochoidal Hole”, Far East Journal of Applied Mathematics, 13(1) 2003, 31-38, Allahabad.

  • Rashid Ali, M.M. Ali & G. N. Parrey, “Stress Distribution in a thin Isotropic Infinite Elastic Plate Having an Epitrochoidal Hole Under Uniform Pressure.” Proceeding, International Conference on Mathematical Modeling, TMH, 2001, U.O.R., Roorkee, India.

  • Rashid Ali & M.M. Ali, “Stresses in an Infinite Elastic Plate Having a Hole in the form of Pascal’s Limacon Under Uniform Pressure.” Bulletin of Pure And Applied Sciences, 2001, Delhi, India.

  • Rashid Ali, M.M. Ali & G. N. Parrey, “A Punch Problem for Initially Stressed Neo-Hookean Solids.”Defence Science Journal,Vol.,51,No.-1, 2001, 93-99, India.

  • Rashid Ali & M.M. Ali, “Two Unequal Cracks with Coalesced Plastic Zones-The Generalised Dugdale Model Approach”. Mechanics of Materials 32 (2000) 37-42, Netherlands.

  • Eighth s tudent is doing on “Simulation and modeling from AKTU.

  • Seventh student is doing on “Developing Inventory Model For Deteriorating Items In Green Supply Chain” from AKTU Lucknow.

  • Sixth student is doing on “Development And Analysis of Identity Based Signcryption Schemes Based on Algebric Number Theory” from AKTU, Lucknow

  • Fifth student is doing on “Mathematical Modeling for Some Service Organisations” from AKTU, Lucknow.

  • Fourth student is doing on “Mathematical Modeling of Blood Flow Problems in Cardiovascular System” from G.K.V. Hardwar.

  • Third thesis is awarded on the topic “Analytical Study of Recent Techniques in Boundary Value Problems in Elasticity” (2013) from UPTU.

  • Second thesis is awarded on the topic “Wavelet and their Applications in Numerical Approximations and Image Compression” (2011) from UPTU.

  • A thesis is awarded on the topic “Analytical Study of Some Recent Techniques in Solid Mechanics” (2008) form GKV Haridwar.

  • Jyoti Guglani, A N Mishra, “Continuous Punjabi Speech Recognition model based on Kaldi ASR toolkit”, International Journal of Speech Technology , Springer Science, LLC, 2018.

  • Usha Sharma , Sushila Maheshkar , A N Mishra , “ Visual Speech Recognition using Optical flow and Hidden Markov Model” , Wireless Personal Communication, pp 1-19 , Springer US, 2018.

  • Deepti Shinghal, A.N. Mishra, Amit Saxena, “ Low Power Architecture for ASIPs: Based on Adiabatic Switching Principles”, International Journal of Engineering Sciences and Emerging Technologies , Vol. 8, Issue 6, 2016.

  • Deepti Shinghal, A.N. Mishra, Amit Saxena, “Design And Implementation Of Adiabatic Latch For Low Power Embedded Systems”, International Journal of Scientific Research and Management Studies, Vol. 2, Issue 4, 2016.

  • Usha Sharma, Sushila Maheshkar and A. N Mishra, “Hindi Numerals Classification using Gammatone Frequency Cepstral Coefficients Features” , in Proceedings of 4th International Conference on “Computing for Sustainable Global Development ,INDIACom-2017,IEEE conference , New Delhi, pp 2171- 2175.

  • Dhananjay Kumar, Pramod Kumar and Sharmila, The importance of Healthcare information Privacy through Blockchain, “Security and Privacy of Electronic Healthcare Records: Concepts, Paradigms and Solutions” to be published by The IET Book Series on e-Health Technologies (Conditional Acceptance)

  • Sharmila, Dhananjay Kumar and Pramod Kumar, Introduction to Multimedia Big data computing for IoT Applications, "Multimedia Big Data Computing for IoT Applications: Concepts, Paradigm, Springer. (Chapter Accepted)

  • Sharmila, A Novel Techniques for the Test case Prioritation in Regression Testing, “Advances in Computing and Data Sciences”, Springer,2018, pp. 362-371.

  • Sahil Aggarwal, ESE Guide Mechanical Engineering 2018. 2017 GKP,ISBN 978- 9386309518

  • Sahil Aggarwal, ESE Guide General Studies and Engineering Aptitude. 2017 GKP, ISBN 978- 81-9330-361-0

  • Umang Kant, Mayank Singh, Viranjay M. Srivastava, “IoT with Cloud Computing”, CRC Publication (Submitted)

  • Umang Kant, Mayank Singh, S.K.Mishra, Viranjay M. Srivastava, “IoT with Artificial Intelligence”,CRC Publication (Submitted)

  • Umang Kant, Mayank Singh, P.K.Gupta, Viranjay M. Srivastava, “Cloud based Predictive Intelligence andit’s Security Models”, in Predictive Intelligence using Big Data and the Internet of Things, IGI Global,Pg. 128-143.

  • Kumar, A.; Alam, B., “Real Time Fault Tolerance Task Scheduling Algorithm with Minimum EnergyConsumption," Springer AICS Series, SCOPUS Indexed, Volume 380, pp 441-448, 2016.

  • Arvind Kumar, Ranvijay, Rama Shankar Yadav, SmritiAggrawal. "Energy Management For Energy Harvesting Real Time System With Dynamic Voltage Scaling", Communications in computer and Information Science, SpringerLink 2011, Volume 197, Part 2, SCOPUS, DBLP, pp 536-548.

  • Arvind Kumar, Pawan Singh Mehra, Gagan Gupta and Manika Sharma “Enhanced Block Playfair Cipher” presented in International Conference QSHINE-2013, Springer LNICST 115, pp. 689–695, 2013, SCOPUS Indexed, DBLP.

     

  • Y. Sharma, Shatakshi, Palvika, A. Dagur and R. Chaturvedi, " Automated Bug Reporting System with Keyword-Driven Framework," 2018 Soft Computing and Signal Processing, https://doi.org/10.1007/978-981-13-3393-4_28, Springer Nature Singapore, SCOUPS Indexed.

     

  • Vivek srivastava, Arpita Gupta, "Basic Electronics", Vrinda Publication, India, ISBN:81-8281-081-7 1, 486, 2006

  • Sakshi Gupta, Kanika Dutta , “Fast Algorithm For Recognition of or Codes”, LAP LAMBERT Academic Publishing, Germany,ISBN-13:978-3-330-03340-5, ISBN-10:3330033401, EAN:9783330033405, Jan, 2017

  • Sakshi Gupta, Jagdish Lal Raheja, "Remote Plant Disease Monitoring System Using Mobile Communication", LAP LAMBERT Academic Publishing, Germany, ISBN 978-3-659-68482-1, EAN: 9783659684821, Feb, 2015

  • SANJEEV KUMAR "COMPUTER APPLICATIONS", DHANPAT RAI & CO. PVT. LTD.

  • Srivastava A.K., Nag. A., Dixit, A R., Tiwari S., Srivastava V.S. , Parametric study during abrasive water jet turning of hybrid metal matrix composite, ISSN 2195-4356, Lecture Notes in ME 2019, pp. 72-84, cited by 5.

  • Kanika Garg “Cryptography & Network Security”, ISBN: 978-93-5014-139-7, S. K. Kataria & Sons, 2015 (Second Edition)

X

Notices

Enquiry